• 24 x 8 Hardinge SAG Mill GM133

    No price - Bellingham, WA, USA
    • Manufacturer: Hardinge

    24 ft x 8 ft hardinge sag mill – 2 flender gearboxes – no motors or liners – previously ran on dual 1000 hp motors

  • 5' x 3' SAG Mill

    No price - United States

      5' x 3' (1524mm x 914mm) sag mill with 20 hp motor

    • 16 ft. x 30 ft. Vecor SAG Mill GM181

      No price - Bellingham, WA, USA

        16 ft. x 30 ft. vecor sag mill available as is or fully refurbished complete with: – refurbished mill shell, 6mm rubber lined, drilled for steel lining – refurbished mill ends, 6mm rubber lined, dr...

      • 12.6’x 7.1′ EGL ANI SAG Mill GM158

        No price - Bellingham, WA, USA

          12.6’x 7.1′ egl ani sag mill – grate discharge – inching drive and clutch – main bearings and bearing housings still fitted to trunnions – with steel liners & grates (new, unused and unaudited) – n...

        • METSO 36' x 20.5' SAG Mill

          No price - United States
          • Manufacturer: Metso

          unused metso 36' x 20.5' (10.9m x 6.2m) sag mill, 15,000 kw (20,107 hp) gearless motor drive, 50 hz. location: usa, belgium and turkey

        • 22 x 7 ft Hardinge Cascade Autogenous Mill w/ 1500 hp GM229

          No price - Bellingham, WA, USA Recently Added
          • Manufacturer: Cascade

          22 x 7 ft hardinge cascade autogenous mill – 1,500 hp ge synchronous motor, 180 rpm, 4,000 volts, 216 amp arm, amp field 100, exc volts 250, 3 phase, 60 cycle – working volume of 2770 ft3 – shell o...

        • Mill, Sag, 13'6" X 4', Marcy, No Motor,

          No price - Brisbane, CA, USA

            marcy dry grind sag mill, 13' 6" (4.15 m) diameter x 4' (1.22 m) long, 300 hp motor (not included), includes bull gear, pinion gear, large falk gearbox, air clutch, and lube set. manufactured new i...

          • Mill, Sag, 18' X 6', Hardinge, 1000 HP,

            No price - Brisbane, CA, USA
            • Manufacturer: Hardinge

            hardinge-koppers sag mill, 18' x 6'. complete with 1000 hp, 4000v, 3 phase, 60 hz 885 rpm induction siemens-allis motor, falk gear reducer and eaton yale clutch. girth gear 15.25" wide, 204 toot...

          • Mill, Sag, 19.35' X 27.88', Morgardshammar, 1,877 HP,

            No price - Brisbane, CA, USA

              morgardshammar pebble/sag mill, 19.35' (5.9 m) diameter x 27.88' (8.5 m) long, 2-1,877 hp (1,400 kw) motors. currently configured as a grate discharge sag or pebble mill. no liners included. units ...

            • Mill, Sag, 28' x 15'5, Metso, 5600 KW

              No price - Brisbane, CA, USA
              • Manufacturer: Metso

              metso sag mill, 28' diameter x 15'5" long, includes 5600 kw mill motor, complete with hydraulic jacking system, lubrication system, inching drive, feed chute, and mclelland liner handler.