• 16 ft. x 30 ft. Vecor SAG Mill GM181

    No price - Bellingham, WA, USA

      16 ft. x 30 ft. vecor sag mill available as is or fully refurbished complete with: – refurbished mill shell, 6mm rubber lined, drilled for steel lining – refurbished mill ends, 6mm rubber lined, dr...

    • UN FLSMIDTH 40' x 25' (12,192mm x 7,620 mm) Gearless SAG Mill

      No price - United States
      • Manufacturer: FLSmidth

      unused flsmidth 40' x 25' (12,192mm x 7,620 mm) gearless sag mill

    • 22 x 7 Hardinge SAG Mills GM134

      No price - Bellingham, WA, USA
      • Manufacturer: Hardinge

      22 ft x 7 ft hardinge sag mills – no motors of liners – previously ran on two 800 hp motors – dual flender gearboxes

    • 24 x 8 Hardinge SAG Mill GM133

      No price - Bellingham, WA, USA
      • Manufacturer: Hardinge

      24 ft x 8 ft hardinge sag mill – 2 flender gearboxes – no motors or liners – previously ran on dual 1000 hp motors

    • Mill, Sag, 13'6" X 4', Marcy, No Motor,

      No price - Brisbane, CA, USA

        marcy dry grind sag mill, 13' 6" (4.15 m) diameter x 4' (1.22 m) long, 300 hp motor (not included), includes bull gear, pinion gear, large falk gearbox, air clutch, and lube set. manufactured new i...

      • Mill, Sag, 38' X 25'5", Metso, 26,000 HP, Unused

        No price - Brisbane, CA, USA
        • Manufacturer: Metso

        unused metso grate discharge sag mill trommel with replacement panels, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,000 hp (19,400 kw) siemens wrap around drive motor-operating frequency 60 hz...

      • Mill, SAG, 36' X 20.5', Metso, 20,000 HP, Unused

        No price - Brisbane, CA, USA
        • Manufacturer: Metso

        sag mill, 36' diameter x 20.5 long (11m x 6.2m). manufactured by metso in 2007, unused and never installed. complete with abb 15,000 kw (20,115 hp), 10,000 v, 50 hz gearless drive, control room, an...

      • Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused

        No price - Brisbane, CA, USA

          unused fl smidth sag mill, 40' (12,192 mm) diameter x 25' (7,620 mm) long, designed for 34,866 hp (26,000 kw) wrap around gmd motor [not included]. no liners.

        • Mill, Sag, 28' x 15'5, Metso, 5600 KW

          No price - Brisbane, CA, USA
          • Manufacturer: Metso

          metso sag mill, 28' diameter x 15'5" long, includes 5600 kw mill motor, complete with hydraulic jacking system, lubrication system, inching drive, feed chute, and mclelland liner handler.

        • Mill, Sag, 19.35' X 27.88', Morgardshammar, 1,877 HP,

          No price - Brisbane, CA, USA

            morgardshammar pebble/sag mill, 19.35' (5.9 m) diameter x 27.88' (8.5 m) long, 2-1,877 hp (1,400 kw) motors. currently configured as a grate discharge sag or pebble mill. no liners included. units ...