• MARVEL SERIES 8 MARK III VERTICAL BANDSAW

    No price - Detroit, MI
      • Motor: 5 HP
      • Weight: 3,000 lbs

      capacity @ 90 degree………….. 18” x 22” capacity @ 45 degree………….. 18” x 13” max tilt to right…………………… 60 degrees max tilt to left…………………….. 60 degrees head tilt (manual / powered)… powered degree of ...

    • 1997 HEM VERTICAL AUTOMATIC CUTOFF SAW

      No price - Detroit, MI
      • Manufacturer: Fast
      • Motor: 5 HP
      • Weight: 5,500 lbs

      manufactured in 1997 specifications capacity @ 90 deg: 18” x 20” t capacity @ 45 deg: 18” x 14” t max tilt to right: 45 degrees max tilt to left: 45 degrees head tilt (manual / powered): powered th...

    • 1996 Behringer HBP1080/2100 SEMI-AUTOMATIC HORIZONTAL BANDSAW

      No price - Detroit, MI
      • Manufacturer: Behringer
      • Motor: 12.3 Horsepower
      • Weight: 38,000 Lbs

      43" x 83" behringer hbp1080/2100, semi auto, dual col., pwr roller conv, auger, dro, var fd/pressure, hyd lift/sq arms, 1996 equipped with: large dual-column parallel downfeed design solid cast fra...

    • 2013 10" x 10" Cosen Model C-260NC Horizontal Band Saw

      No price - Elk Grove Village, IL
      • Manufacturer: Cosen
      • Motor: 5HP

      fully automatic band saw, new never installed blade size: 144" x 1.3" x 0.042" | blade motor: 5hp | blade speed: 20-100 m/min (66-328 ft/min) | coolant motor: 1/8hp | capacity round: (10.2") | work...

    • 1989 20" x 20" Amada Model HA-500 Automatic Horizontal Band Saw

      No price - Elk Grove Village, IL
      • Manufacturer: Amada
      • Motor: 7.5 HP

      automatic, 20" x 20" capacity capacity: 20" w x 20" h | blade speed: 59-472 ft/min @ 60 hz | blade width: 1.5" | eqiupped with: shuttle vise, main vise | main motor drive: 7.5 hp | programmable fee...

    • OLIVER 270 D

      $3,795 - Matthews, NC Recently Added
      • Manufacturer: Oliver

      oliver tilting arbor table saw   model 270-d blade diameter 16" blade projects 4" 5 hp  direct motor drive to blade rip capacity 50" bed size 36¾" x 44½" with bed extension 28½" equipped with: over...

    • MSC VECTRAX 450

      $2,550 - Matthews, NC Recently Added
      • Manufacturer: MSC

      msc vectrax 450 band saw with blade welder drive type: variable speed pulley; throat capacity (mm): 457.20; throat capacity (inch): 18; height capacity (inch): 10; height capacity (mm): 254.00; pha...

    • ROBLAND Z320

      $4,999 - Matthews, NC Recently Added
      • Manufacturer: Robland

      robland sliding table saw model z320 126" crosscut capacity with swing arm support and scoring capability, 16 inch max blade size with 3  3/4 inch scoring blade 7.5 hp main motor, .75 hp scoring mo...

    • 1999 SELCO EBT 110

      $12,000 - Matthews, NC Recently Added
      • Manufacturer: Selco

      selco cnc panel saw cutting depth: 4440mm (174.8in) cutting height: 4450mm (175.2in) blade overhang: 110mm (4.33in) main blade motor: 20 hp number of holdowns: 8 controller: nc410 total hp: 25.5 ma...

    • CTD N 80

      $9,450 - Matthews, NC Recently Added
      • Manufacturer: CTD

      ctd  n-80 double miter saw | used 4-1/2" x 4-1/2" x 3" toe notch cap. 3-1/2" wide x 3" high miter cap. (staggered blade configuration); (2) 2 hp tefc - 3,450 rpm saw motors, belt driven to saw spin...