Used saws cut

- 3115 listings found
Sort by Price: Low to High | High to Low
  • 2011 HYD-MECH H-10A

    • Manufacturer: Hyd-Mech
    • Motor: 5 HP Blade, 1 HP Hyd
    • Weight: 3500 LB

    Plc automatic control: the nc controller controls the automatic cycle and allows for manual operation as well. job information, such as part length and quantity, is entered through the interface keypad. up to 99...

    $22,500 (USD)
    White Marsh, MD, USA
  • 1997 MARVEL PA10

    • Manufacturer: MARVEL
    • Motor: 3 HP. 220V 3Ph
    • Weight: 2750 Lbs.

    Automatic feed of head and shuttle coolant extra blades piece counter chip brush work light standard features: operator’s control panel: is conveniently located on the front of the machine and offers full control...

    $11,500 (USD)
    White Marsh, MD, USA
  • ROCKWELL/DELTA 33-694 #2934

    • Manufacturer: Delta

      Model: 33-694 s/n: eb3246 features exclusive turret-arm action. specifications standard blade: 12" standard guard: 10" motor: 2hp 3/230/440 (prewired 230) motor speed: 3450 rpm front arbor (left hand thread): 5/8...

      No price
      Baltimore, MD, USA
    • Panel Saw With 3-1/4 HP Milwaukee Saw

          Sheet board cutting machine made by safety speed cut mfg. co.  model: h5 serial no: f79 milwaukee saw 3-1/4 max hp cat no: 6486-69 serial: 401a607330193 120v ac 15 amp 5800 rpm

          $1,199 (USD)
          Watertown, CT, USA
        • HydMech S-23A

          • Manufacturer: Capacity

            Make: hydmech model: s-23a table height: 33" rectangular capacity at 90°: 16" x 20" rectangular capacity at 45°: 16" x 14" rectangular capacity at 30°: 16” x 8 1/2” round capacity at 90°: 16" round capacity at 45...

            $33,500 (USD)
            Watertown, CT, USA
          • EVERETT 10" Abrasive Cut-Off #7284

            • Manufacturer: EVERETT

              Everett 10" abrasive cut-off saw with stand model: 10" abrasive cut-off description: fast, low cost cutting of hardened tool steel, bars, pipe, angle iron, tubing, flat stock and rod use a steel blade to cut plas...

              No price
              Baltimore, MD, USA
            • WHIRLWIND 212R UP-CUT

                  1-used whirlwind 212r up cut saw. right hand saw, motor: 10hp, cut-off capacity: 4 in. x 10 in., 2 in. x 12 in., or 1 in. x 13 in., blade size: 18 in. diameter with 1 in. bore, w/ two button safety palm switch.

                  $5,250 (USD)
                  New Albany, IN, USA
                • 1996 REDUCED PRICE - 20" Everett Cut-Off / Met Lab Saw

                      20" everett wet abrasive oscillating cut-off / met lab saw with coolant system, wet hood and mist collector; 20" diameter wheel capacity, 20 hp motor, hydraulic powered head, pneumatic vise, gravity feed roller c...

                      $1,950 (USD)
                      Cincinnati, OH, USA
                    • OEM INC DOWN-CUT PROFILE SAW 10257

                          Oem inc down-cut profile saw, s/n oem200-2665, model hs4/24-ext, 16″ diameter blade, 2 hp 460 volt motor, belt drive, pneumatic hold down clamps, adjustable height legs

                          No price
                          Elk Grove Village, IL, USA
                        • GOODMAN TRAVELING UP-CUT PROFILE SAW 5336

                              Goodman traveling upcut profile saw, s/n 4796, 9″ od blade, length control, 480 volt operation, pnuematic hold down

                              No price
                              Elk Grove Village, IL, USA