search
  • 1987 TAURING DR/3

    No price - Bünde, Germany
    • Manufacturer: TAURING
    • Weight: 1100 kg

    motozized section bender with 3 rolls drive. the adjustment of the diameter of the bending ring ensured through both lower rolls by hand. the machine is fit for using in vertical and horizontal e...

  • Pullmax Z 41

    No price - France
    • Manufacturer: Pullmax

    section bender pullmax z41 motorized rolls number : 3 engine power : 15kw rotation speed (rpm) : 6 Ø shaft : 120mm corner capacity Ø 1600 : 130 x 130 x 13mm plate on Ø 1300 : 125 x 20mm ipn Ø 1200 ...

  • Pullmax Z 31

    No price - France
    • Manufacturer: Pullmax

    section bender pullmax z31 motorized rolls number : 3 engine power : 15 kw rotation speed : 6 rpm horizontal and vertical position capacities l Ø 700 : 75 x 75 x 10 mm plate on Ø 500 : 75 x 15mm ip...

  • Haeusler HPR 12 HAYSAS

    No price - France
    • Manufacturer: Haeusler

    section bender haeusler hpr 12 haysas number of motorized bending rollers: 3 capacity : - corner Ø 1000: 110 x 110 x 14 mm - t Ø 1200: 120 x 120 x 13 mm - flats on Ø 1000: 100 x 20 x 10 mm - upn Ø ...

  • Tae Yeon TYRHD25B - spiral bender for rebar Straightening machines for bars and sections

    No price - Deinze, Belgium
    • Manufacturer: Tae Yeon TYRHD25B -

    multifunction spiral bender for u-bar & o-rings - u-bar >> min radius: 300mm - u-bar >> max radius: unlimited - o-ring >> min radius: 300 mm - o-ring >> max radius: 6000 mm - angle: 0° - 360° -...

  • Omes P20 universal bender Hor+Vert profilemachines, section bending rol...

    No price - Deinze, Belgium
    • Manufacturer: Omes P20
  • 1982 Mubea Muhr und Bender KLSH 550 Section Shear punch

    $7,832 - Gütersloh, Germany
    • Manufacturer: Mubea

    55 t punching power, holes diameter 30 in 15 mm, punching stroke 50 mm. care flat steel 200 x 20 mm or 400 x 16 mm, klink capacity 75 x 8 mm. motor power 7,5 kw, total weight 1100 kg with an assort...

  • Muhr & Bender KBL 13 Profile shears tube

    $4,964 - Güntersleben, Germany
    • Manufacturer: Muhr & Bender

    5 professional profile scissors cutting disengage stamped l and t carrier round and square steel good tidy condition not too often used device is 2 times available, price is the same

  • Arlo HP 22 angle bender Hor+Vert profilemachines, section bending rol...

    No price - Deinze, Belgium
    • Manufacturer: Arlo HP 22
    • Capacity: 22 ton
    • Weight: 635 kg

    bending examples:  - 100 mm width x 20 mm thickness - 120 mm width x 15 mm thickness min axis base between mobile and fixed pins: 110 mm max axis base between mobie and fixed pins: 310 mm standard...

  • Tae Yeon TYRHD25B - spiral bender for rebar Hor+Vert profilemachines, section bending rol...

    No price - Deinze, Belgium
    • Manufacturer: Tae Yeon TYRHD25B -

    multifunction spiral bender for u-bar & o-rings - u-bar >> min radius: 300mm - u-bar >> max radius: unlimited - o-ring >> min radius: 300 mm - o-ring >> max radius: 6000 mm - angle: 0° - 360° -...