• 2004 HOMAG KAL 310/3/A3 EDGEBANDER (HIGH PRODUCTION)

    $41,232 - Charlotte, NC, USA
    • Manufacturer: Homag

    elect./voltage: 600 v, 60 cy, 3 ph homag kal 310/3/a3 multi-coils single sided edgebander 0.4 - 3 mm edge thickness cap., min. panel width 55 mm; maximum panel thickness 55 mm;technical specificati...

  • 16" WIDTH 24" THICKNESS Diacro 24 NEW BENDING ROLL, MADE IN USA

    $2,470 - Harrison, NJ, USA
    • Manufacturer: Diacro

    new di-acro 24" x 16ga hand operated slip rollers model: 24 made in usa description: di-acro slip rollers feature a cam-actuated idler roller which permits the operator to locate bends at any point...

  • JMT MRB Economical Motorized Initial Pinch Bending Rolls

    No price - Salt Lake City, UT, USA
    • Manufacturer: JMT

    model mrb – cast iron frame standard specifications: – conical bending – bottom and back rolls are manually adjusted – top and bottom rolls powered by electrical motor, gearbox and gear drive – por...

  • 2008 ZOPF ZB80/2M 60mm x 60mm x 6mm Horizontal/Vertical Section Bending Rolls

    No price - Leicester, United Kingdom
      • Capacity: with Appropriate Formers
      • Weight: 0.39 ton / 400 kgs

      input: 415/3/50 ac 1.5 kw | width: 2'8" / 813mm | height: 4'4" / 1.32m | length: 3'10" / 1.17m | square: 40mm | capacity: with appropriate formers | comments: ***video shows the machine under powe...

    • 1995 FACCIN RCMI 150 150mm x 150mm x 15mm Hydraulic Double Pinch Section Bending Rolls.

      No price - Leicester, United Kingdom
      • Manufacturer: FACCIN
      • Weight: 7.8 ton / 7920 kgs

      width: 7'7" / 2311mm | height: 7'0" / 2134mm | length: 6'11" / 2110mm | square: 90mm | comments: ***video shows the machine under power*** | fitted with: 1 set of universal rolls | actuated via: f...

    • 1991 ROUNDO R3 75mm x 75mm x 7mm Double Pinch Vertical/Horizontal Hydraulic Section Bending Rolls

      No price - Leicester, United Kingdom
      • Manufacturer: Roundo
      • Capacity: With Appropiate Rolls
      • Weight: 1.10 ton / 1120 kgs

      input: 380/420/3/50 ac 5.5 hp approx | width: 3'4" / 1.02m | height: 3'8" / 1.12m | length: 3'10" / 1.17m | capacity: with appropiate rolls | fitted with: 1 x set of standard rolls | flats on edge...

    • 2008 AKYAPAK APK-101 100mm x 100mm x 10mm Hydraulic Double Pinch Section Bending Rolls

      No price - Leicester, United Kingdom
      • Manufacturer: Akyapak
      • Capacity: With Appropriate Rolls
      • Weight: 2260 kgs / 2.2 ton

      input: 415/3/50 ac 11 kw | width: 4'8" / 1.42m | height: 6' / 1.83m | length: 4'10" / 1.47m | square: 60mm | capacity: with appropriate rolls | fitted with: 1 set of standard rolls | actuated via:...

    • 1983 ROUNDO R3 75mm x 75mm x 7mm Double Pinch Vertical/Horizontal Hydraulic Section Bending Rolls

      No price - Leicester, United Kingdom
      • Manufacturer: Roundo
      • Capacity: With Appropriate Rolls
      • Weight: 1.1/2 ton / 1524 kgs

      input: 380/420/3/50 ac 5.5 hp approx | width: 3'4" / 1.02m | height: 3'8" / 1.12m | length: 3'10" / 1.17m | capacity: with appropriate rolls | fitted with: 1 x set of standard rolls, 1 x set of pi...

    • ZENITH RBM50 50mm x 50mm x 5mm Mechanical Section Bending Rolls, Unused

      No price - Leicester, United Kingdom
      • Manufacturer: Zenith
      • Weight: 0.10.0.0 / 508 kgs

      input: 415/3/50 ac 2.2 kw | width: 2'8" / 813mm | height: 4'6" / 1.37m | length: 2'10" / 864mm | square: 35mm | fitted with: 1 set of standard rolls | actuated via: wander type foot switch | flats...

    • 2010 SAHINLER HPK200 MARINE 200mm x 200mm x 20mm Hydraulic Section Bending Rolls, Unused, Manufactured 2010

      No price - Leicester, United Kingdom
      • Manufacturer: Sahinler
      • Capacity: With Appropriate Rolls
      • Weight: 31 ton / 33,236 kgs, Main Machine Base Weighs 15.3 tons / 15,558kgs

      input: 30 kw | tubes: 150mm dia x 9mm wall thickness. min dia 4000mm | width: machine base 3000mm / 9'10" | length: machine base 3760mm / 12'4" | rounds: 120mm. min diameter 3000mm | square: 120mm...