• PRESS SECTION 102" (2600MM) VOITH JUMBO 1993

    • Manufacturer: Jumbo

      covers. (1) voith gearbox mdl co32, (1) skf bearing, (3) firestone3-membranes pneumatic actuators, (4) firestone 2- membranes pneumatic actuators, new in 1993

      No price
      Chalfont, PA, USA
    • 72" (1850MM) PRESS SECTION REFURBISHED 2016

          72" press section - refurbished 2016 - press section 4 rolls 1850mm trim width. - was in use as part of a filter/tape paper machine. - nip ressures used previously: 90kn/m and 120kn/m *** suction roll also availa...

          No price
          Chalfont, PA, USA
        • Two Drive Sections of Hytrol B 13247

          • Manufacturer: Hytrol

            two drive sections of hytrol belt -(line 1) -over roller matte top case conveyor -approx. 10ft. lentgth -belt over roller

            No price
            Shoemakersville, PA, USA
          • Harvest Wash Conveyor Section #12279

                vegetable/fruits washing conveyor with scrubbing brushes. approx. 48" long rotating brush rollers. rugged construction.

                No price
                Ball Ground, GA, USA
              • Harvest Wash Conveyor Section #12277

                    vegetable/fruits washing conveyor with scrubbing brushes. approx. 10' long conveyor with 48" rotating brush rollers. driven by 1-1/2 hp, 208-230/460v, 60hz, 4.6-4.4/2.1amps, 1725 rpm baldor-reliance motor. spray ...

                    No price
                    Ball Ground, GA, USA
                  • 1999 Taylor 20 section x 8.5 12224

                    • Manufacturer: Taylor

                      used taylor clamp carrier.20 section, 8.5' wide6 clamps per sectionclamps open 32" with 2-1/2" jawspneumatic rotationpneumatic tightnings/n f298, 1999

                      $14,900 (USD)
                      Williamsport, PA, USA
                    • Taylor Clamp - 20 section x 8.5

                      • Manufacturer: Taylor

                        used taylor clamp carrier s/n f298 this used clamp carrier, manufactured by taylor, features 20 sections. technical specifications: • 20 section, 8.5' wide • 6 clamps per section • clamps open 32" with 2-1/2" jaw...

                        $14,900 (USD)
                        Auburn, GA, USA
                      • 1995 DOUCET SRR-20-7.5-120-32 Section Hydraulic Clamp

                        • Manufacturer: Doucet

                          8' wide x 40 sections, auto clamp and tightening system. needs to be cleaned up. machine is still assembled. available immediately.

                          $7,500 (USD)
                          Jasper, IN, USA
                        • Qty (3): Stainless steel agitator shafts. 17'4" L x 6" diameter tapers to 5" the bottom 8'3" section

                              qty (3): stainless steel agitator shafts. 17'4" l x 6" diameter tapers to 5" the bottom 8'3" section. hub and blades available for one of the shafts. believe (2) are 316 stainless steel and (1) is alloy 20. a...

                              No price
                              Penns Grove, NJ, USA
                            • 1992 Taylor 20 section x 8.5 wide 11619

                              • Manufacturer: Taylor

                                model-800165 8.5 wide x 20 section 6 clamps per section 3-1/2" jaws x 32" opening total clamps 120 hydraulic rotation and auto tighten loosen, two panel flatteners

                                $18,000 (USD)
                                Williamsport, PA, USA

                              Have 5 seconds to help us improve the results?

                              I'll do it
                              No thanks