search
  • Nice European Shaper

    $3,250 - United States
    • Manufacturer: Casadei

    casadei 5hp shaper good condition 1-1/4" spindle rigger: not required | electric: 230 volt 60 cycle 3 phase | year of man.: 1995

  • Used Cantek Shaper

    $2,250 - United States
    • Manufacturer: Cantek

    solid used shaper 5hp motor 1-1/4" spindle 3000/4000/8000/10000 rpm

  • Tilting Spindle Shaper

    $5,249 - United States
    • Manufacturer: Powermatic

    southeast us demo model in superb condition 5  hp      1 1/4" spindle  tilts   45 degree forward and    5 degree back 7" spindle travel

  • Larick 410 F Shaper/Sander

    $17,900 - United States
    • Manufacturer: Larick

    7.5 hp shaper motor, 480 v, 3 phase 4,000-7,000 rpm 1.25" spindle size two 2 hp motors sanding station 400 to 1800 rpm sanding station speed up to 9" wheel diameter 6" wide conveyor system with 4 s...

  • Nice European Shaper with Power Feeder

    $3,875 - United States
    • Manufacturer: Casadei

    casadei 5hp shaper good condition1-1/4" spindle c/w univer power feeder

  • SECO SHAPER wFCT POWER FEEDER

    $2,750 - United States
    • Manufacturer: Seco

    southeast us  •  1-1/4" spindle diameter   •  6-1/4" spindle length   •  8" spindle stroke   •  3,000/6,230/9,000 rpm spindle speed

  • Bridgewood BW-512TS Sliding Table Tilt Shaper

    $3,495 - United States Recently Added
    • Manufacturer: Bridgewood

    northeast us 5hp 3ph 230 volt motorsliding tabletilt spindle

  • NORTHTECH Single-Spindle Shaper w/Power Feeder

    $1,750 - United States
    • Manufacturer: Northtech

    southeast us northtech single-spindle shaper w/power feeder:7.5hp, 230v, 3ph spindle motor27-1/2 inch x 35-1/2 inch tablefence adj. on both sides1-1/4 inch diameter spindleapprox. 5 inch under spin...

  • Volpato Shaper Sander has seen minimal use

    $19,500 - United States
    • Manufacturer: LASM

    coveyor fed shaper sander machine: 2 counter rotating shaper spindles  2 profiled belt units 1 profiled wheel unit perfect for furniture, doors, edge treatment

  • POWERMATIC 26 Shaper - Rare SINGLE-PHASE Machine!

    $1,500 - United States
    • Manufacturer: Powermatic

    northeast us powermatic 26 shaper:  •  3 hp / 240v single-phase machine  •  forward & reverse switch  •  (4) amana carbide cutters included  •  mounted to casters for mobility needs to move - call ...