• Di-Acro 1

    • Manufacturer: Di-Acro

      make: di-acro model: 1 serial : q1870 max material capacity: 16 ga max 90 degree notch: 6" x 6" 4 ton rated capacity 5/8" ram stroke asset bolted to metal stand great working condition sold as is

      $750 (USD)
      Watertown, CT, USA
    • Wysong H-2510

      • Manufacturer: Wysong

        make: wysong model: h-2510 max capacity: 1/4" (mild steel) max cutting length: 10' 2" length of blades: 122" gap: 3" rake angle: 5/16" number of hold downs: 13 spm: 18 (full width cut) spm: 45 (reduced width cut)...

        $33,000 (USD)
        Watertown, CT, USA
      • 1994 Kuhn Master 120 4T

        • Manufacturer: Kuhn
        • Working Width: 1.6 m

        hydr. packer arm, wear parts good contact: frank viefhues tel. 0170/2107024

        $5,413 (USD)
        Ahaus, Germany
      • 1998 Kuhn Multi- Master 120 4T 80/102

        • Manufacturer: Kuhn
        • Working Width: 1.8 m

        body: full sheet metal | plough: 4 stk | corn feeder: yes | depth wheel: yes | skim coulter: yes | body distance: 1.02 m | working width: 1.8 m | construction type: full rotation plough | height of chassis above...

        $4,837 (USD)
        Wettringen, Germany
      • Lemken Opal 090

        • Manufacturer: LEMKEN
        • Model: OPAL 090
        • Working Width: 0.99 m

        inlays, wear parts as new body: full sheet metal | plough: 3 stk | depth wheel: yes | skim coulter: yes | body distance: 85 m | working width: 0.99 m | construction type: full rotation plough | height of chassis ...

        $4,451 (USD)
        Weimar (Lahn), Germany
      • 1995 Kuhn Master 120 4 T

        • Manufacturer: Kuhn
        • Working Width: 1.4 m

        body: full sheet metal | plough: 4 stk | depth wheel: yes | skim coulter: yes | body distance: 0.9 m | working width: 1.4 m | construction type: full rotation plough | height of chassis above ground: 0.7 m

        $4,451 (USD)
        Weimar (Lahn), Germany
      • 1989 LISSE A 60.25 three-roll sheet metal bending machines

        • Manufacturer: LISSE
        • Weight: Approx. 800 kg

        used two-roll round baler compl. elec. equipment, pneum. device for actuating the folding bearing, height adjustment of the lower roller for the contact pressure via hand crank, knee lever, control panel, foot sw...

        No price
        Wiesbaden, Germany
      • 1996 TRUMPF Trumatic TC L 6030 - 3 kw Laser Cutting Machines

        • Manufacturer: Trumpf

          laser cutting machines trumpf trumatic tc l 6030 - 3 kw used machine technical data: work area: 6,000 x 2,000 x 115 mm control: bosch cc 220 laser power: 3,000 watts maximum sheet thickness: structural steel 20 m...

          No price
          Germany
        • 1995 TRUMPF Trumatic TC L 3030 - 2, 6 kw Laser Cutting Machines

          • Manufacturer: Trumpf

            laser cutting machines trumpf trumatic tc l 3030 - 2,6 kw used machine technical data: work area: 3.000 x 1.500 x 115 mm control: bosch cc 220 laser power: 2,600 watt (new in 2006!) maximum sheet thickness: struc...

            No price
            Germany
          • Metz Industrie-Design Gmb 9 Stations Profiling Systems

            • Manufacturer: Metz Industrie-Design Gmb

              profiling systems metz industrie-design gmb 9 stations used machine make: metz industrial design gmbh stations: 9 horizontal center distance: 100 vertical center distance: 72 working width: 80 shaft diameter: 32 ...

              No price
              Schöneck, Germany

            Have 5 seconds to help us improve the results?

            I'll do it
            No thanks