• NEW COLE-TUVE / SAHINLER SRS-5-140 5' x 5/32" Initial-Pinch Sheet & Plate Bending Roll #SRS-5-140

    • Manufacturer: Sahinler

      please note: many products ship straight from manufacturer 5' x 5/32" initial-pinch sheet & plate bending roll cole-tuve single-initial pinch rolls utilize a design that has gained worldwide acceptance. strong ca...

      No price
      Port Orange, FL, USA
    • NEW COLE-TUVE / SAHINLER BSR-3-90 3' x 12 ga. Initial Pinch Slip Roll #BSR-3-90

      • Manufacturer: Sahinler

        please note: many products ship straight from manufacturer 3' x 12 ga. initial pinch slip roll the model bsr initial-pinch rolls are also called slip rolls. their design has gained worldwide acceptance; and altho...

        No price
        Port Orange, FL, USA
      • Baileigh

        • Manufacturer: Baileigh

          digital position readout 2.835" back roll adjustment 3 driven rolls single pinch hydraulic back roll dro for back roll position foot pedal operated

          $18,095
          South El Monte, CA, USA
        • Baileigh

          • Manufacturer: Baileigh

            digital position indicator 2.875" back roll adjustment dro for back roll position industrial grade hydraulic system 3 driven rolls single pinch hydraulic back roll foot pedal operated dual emergency stop cables

            $23,095
            South El Monte, CA, USA
          • Baileigh

            • Manufacturer: Baileigh

              dro for back roll position 3 driven rolls 3.937" back roll adjustment single pinch hydraulic back roll foot pedal operated dual emergency stop cables digital readout industrial grade hydraulic system

              $24,895
              South El Monte, CA, USA
            • SAHINLER MRM-S- 5' x .236", INITIAL-PINCH W/PWR REAR ADJ, 1550X130

              • Manufacturer: Sahinler
              • Capacity: 5' X .236
              • Weight: 3080 LBS

              model: mrm-s-1550 x 130 capacity: 5' x .236 rolls diameter: 5.12" useful length: 61.02" rolling speed, fpm: 10.5 motor: 3 and 1-1/2 dimensions: 128"l x 27"w x 41"h weight: 3080 lbs. capacities based on steel up t...

              No price
              McClellan Park, CA, USA
            • SAHINLER MRM-S- 5' x 1/4", INITIAL-PINCH W/PWR REAR ADJ, 1550X150

              • Manufacturer: Sahinler
              • Capacity: 5' X 1/4"
              • Weight: 3630 LBS

              model: mrm-s-1550 x 150 capacity: 5' x 1/4" rolls diameter: 5.91" useful length: 61.02" rolling speed, fpm: 11 motor: 4 and 1-1/2 dimensions: 128"l x 27"w x 41"h weight: 3630 lbs. capacities based on steel up to ...

              No price
              McClellan Park, CA, USA
            • CARELL A39-13/2.5 #6679

              • Manufacturer: CARELL

                carell 4' x 12 gauge initial pinch plate roll model a39-13/2.5 model: a39-13/2.5 description the carell a39-13/2.5 is a 3 roll, single initial pinch plate bending machine with precision adjustment of lateral bend...

                No price
                Baltimore, MD, USA
              • TENNSMITH SR48P 4' X 16 GA, POWER SLIP ROLLS, INITIAL PINCH

                • Manufacturer: TENNSMITH
                • Capacity: 16 Gauge
                • Weight: 1100 lbs

                model: sr48p capacity, mild steel: 16 gauge maximum forming length: 49 in. diameter of rolls: 3 in. minimum forming radius: 1-1/2 in. wire grooves: 3/8, 1/2, 5/8 in. gearing ratio: 4 : 1 roll speed: 22 rpm / 17.2...

                No price
                McClellan Park, CA, USA
              • SAHINLER MSM 1550-90 5' x 14 GA, INITIAL PINCH SLIP ROLLS

                • Manufacturer: Sahinler
                • Capacity: 5' X 14 Gauge Mild Steel
                • Weight: 1496 lbs

                model: msm 1550-90 capacity: 5' x 14 gauge mild steel diameter of rolls: 3.54" overall bending length: 60" rolling speed: 10-1/2' per minute motor: 1.5 hp, 3 phase, 220/440 volt, 60 hz low voltage at the controls...

                No price
                McClellan Park, CA, USA