- Manufacturer: Nash
This item is used. untested. rated at 1750rpm. has a 1-3/8" shaft. item details: approx dimensions 13" x 8.5" x 10" shipping weight: 345 lbs other details this item is located at our hartz rd (19522) facility.
Airgas single stage regulator y11-215d inlet 3500 psi
The concoa 200 series single stage chrome-plated brass cylinder regulator model 202-1301-01-000 with 316l stainless steel diaphragm is intended for the primary pressure control of non-corrosive, high purity or li...
Used davis standard 3.5″ extruder screw, chrome plated single stage, approximately 24:1 l/d, four rows of mixing pins
Used davis standard 3.5″ single stage extruder screw, approximately 24:1 l/d, with five mixing pin sections
- Manufacturer: Arrow
This lot of arrow vrc-2 single stage compressors is no longer needed from the energy company and needs to be sold to recover funds and inventory space. compressor: arrow vrc-2 single stage. 3" cylinder with 3"...
- Manufacturer: Edwards
Here is an edwards e1m18 rotary vane single stage vacuum pump a343-17-984
this edwards e1m18 pump is in very good cosmetic and functional condition.
the pump runs...
- Manufacturer: APV
Gaulin, model 15m 8tba, single stage, homogenizer. rated output capacity of 15 gallons per hour – depending on materials and application. maximum operating pressure up to 8,000 psi. equipped with ball valve cylin...
- Manufacturer: Gaulin
Gaulin, model 90m38tbs, single stage stainless steel homogenizer. equipped with ball valve cylinders. rated for an output capacity of up to 90 gallons per hour with a maximum operating pressure of up to 8,000 ps...
- Manufacturer: Quincy
( rotary screw ) auto-dual control weight: 2500 | cooling: air cooled | capacity: 235 cfm | drive motor: 50 hp 220/3/60 | dimension (in): 084-048-060 | compressor speed: 1800 rpm | cooling fan motor: 2 hp | ratin...
- Manufacturer: Toyota
Good battery fuel: unavailable | mast spec: 240 | mast type: three stage | subcategory 2: electric sitdown ex rated 4 wheel
Unused 6″ single stage barrier extruder screw, 32:1 l/d, 210.5&” long, possibly for sterling 6″ extruder
- Manufacturer: Gaulin
1 – used apv/gaulin lab homogenizer. model 15mr-8ta. rated 15 gph @ 8000 psi. stainless steel construction. single stage. horizontal design. with hopper. 3 hp 3/60/230-460 volt 1730 rpm tefc motor. unit has been ...
Get email updates for single stage in Virginia, United States