• 1993 FEELER FTS-27 SECOND OPERATION LATHE DK-17450

    • Manufacturer: FTS

      dimensions: 74″ x 35″ x 68″ net weight, approx: 1,000 lbs gross weight, approx: 1,364 lbs electrics: 220 volts, 3 ph, 60 cyc fully enclosed preloaded ball bearing headstock tool storage compartment with sliding b...

      $7,450
      Bethlehem, PA, USA
    • 1980 VDF WOHLENBERG 50" X 242" CNC FLAT BED LATHE #17528

      • Manufacturer: VDF

        vdf wohlenberg 50" x 242" cnc flat bed lathe model u1270s sliding headstock swing over bed | 50" max swing in gap | 100" x 40" long swing over cross slide | 35" max distance between centers | 282" spindle hole | ...

        No price
        Nashville, TN, USA
      • 1969 Waldrich Modular 25636

        • Manufacturer: Waldrich
        • Distance between Centers: 516"

        largest heavy duty lathe available designed for roughing and finishing massive parts 150 ton weight capacity pendant control stations 80" diameter face plate power tailstock telescoping steel way covers operators...

        No price
        Melville, NY, USA
      • 1980 VDF Wohlenberg U-1270-S CNC 16525

        • Manufacturer: VDF
        • Spindle Bore: 4.09"
        • Distance between Centers: 282"

        serial number: d4177 allen bradley 7360 cnc control sliding gap created by power movement of the headstock 100" swing x 40" long gap when open boring bar attachment 8-position power turret distance between center...

        No price
        Melville, NY, USA
      • 2011 Ganesh TY-5040 5250

        • Manufacturer: Capacity
        • Spindle Bore: 10.140
        • Spindle Nose: A2-15

        x-travel: 27.50 | z-travel: 43.25 | chuck size: 50.00 | spindle bore: 10.140 | spindle nose: a2-15 | spindle speed: 550 | rapid traverse: 394 | total spindles: 1 | turret options: 4-way programmable tool post | ...

        No price
        Maitland, FL, USA
      • 1965 DENHAM 72" SLIDING GAP BED LATHE

        • Manufacturer: Denham

          denham 72" gap bed lathe - new 1965 max. swing in the gap: 76" center distance: 120" spindle speeds: 1.5 to 219 rpm 2-speeds hi/low main drive motor: 30 - hp face plate chuck: 72" w/ (4) chuck jaws 4-way tool pos...

          No price
          Irvine, CA, USA
        • 1980 VDF Wohlenberg U-1270-S CNC 16526

          • Manufacturer: VDF
          • Spindle Bore: 4.09"
          • Distance between Centers: 282"

          serial number: d4184 allen bradley 7360 cnc control sliding gap created by power movement of the headstock 100" swing x 40" long gap when open boring bar attachment allen bradley 7360 cnc control 8-station power ...

          No price
          Melville, NY, USA
        • 1975 Warner & Swasey 5A 25895

          • Manufacturer: Warner & swasey
          • Spindle Bore: 12.5"
          • Spindle Nose: A1-20

          serial no. 2706831 12.5" spindle bore cross sliding hexagon turret 32" 4-jaw manual chuck with 12.5" spindle hole cross sliding hexagon turret 4-position tool post steady rest threading full length feed shaft rap...

          No price
          Melville, NY, USA
        • 1L Gisholt, 14" 3J, X-Slide Turret, Threading, 3.5" Hole, 20 HP, '60

            • Spindle Nose: A1 – 8”

            (1) used gisholt saddle-type turret lathe, model 1l, s/n 3111-10 6-position cross-sliding turret threading 4-way tool post coolant pump & piping 14" 3-jaw air chuck taper attachement c...

            No price
            Chicago, IL, USA
          • GISHOLT 3L HEAVY DUTY SADDLE TYPE TURRET LATHE 18322

            • Manufacturer: GISHOLT
            • Spindle Bore: 5-1/8"
            • Spindle Nose: A1-11

            age? fixed position turret ( not cross sliding ) preselector head for speed changes hardened bed ways power feeds and rapid traverse to carriage and turret 24" 4 jaw chuck square 4 way tool post 2 slide tools 3 f...

            No price
            Des Plaines, IL, USA