• Blow Press LTD SC2 125-40-30 Ton Stamping Press, 3" Stroke, Servo Feed

    $35,000 - Watertown, CT, USA Recently Added

      wichita clutch and brake combo rotometer positional encoder dickerman servomatic sm06 servo feed max width = 6” x .078” thick 20 hp eddie current variable speed motor / drive – 230/460 volt 13”...

    • Bliss 100 Ton Stamping Press, 3" Stroke, 12 5/8" Shut Height, 3" Slide Adj, Good Cond.

      $22,250 - Watertown, CT, USA
      • Manufacturer: Bliss

      bliss stamping press 100 ton capacity 3" stroke 3" slide adjustment 12 5/8" shut height (max) 60 spm 64" upper ram 72" lower ram bijur electric oil lube system eddy current ac variable drive motor ...

    • Super V&O 15Ton 2"Stroke 2"Slide Adj Stamping Press W/US 22A Slide Feed 460V 3Ph

      $6,750 - Watertown, CT, USA Recently Added
      • Manufacturer: Super V&O

      make: super v&o serial: 15st-99 tonnage: 15 stroke: 2" max slide adjustment: 2" bijur lubrication system recomended speed: 150-600 spm us slide feed# 22a feeder 460 volt 3ph asset sold as is riggin...

    • Minster 30 Ton Pulsar Stamping Press with Coil Feed, PAX Lube Misting System

      $19,500 - Mansfield, OH, USA
      • Manufacturer: Minster

      minster 30 ton pulsar stamping press with coil feed, pax lube misting system 600 spm, 1.75" bolster adj, 1.25 length of stroke minster tr2-23351 109" x 46" x 96", 20,000 lbs. approx. located in man...

    • Minster 30 Ton Pulsar Stamping Press with Coil Feed, PAX Lube Misting System

      $19,500 - Mansfield, OH, USA
      • Manufacturer: Minster

      30 ton stamping press with coil feed, pax lube misting system 600 spm, 1.75" bolster adj, 1.25 length of stroke minster tr2-30 27959, located in mansfield, oh terms and conditions: this item is be...

    • 1500 ton Danly Used Stamping Press

      No price - Warren, MI, USA Recently Added
      • Manufacturer: Danly
      • Capacity: 1500 ton
      • Stroke: 36"

      bed area: 156"x72" | capacity: 1500 ton | stroke length: 36" | strokes per minute: 20 | slide adjustment (powered): 16" | shut height (sdau over bed): 88.5" | windows (opening in side columns): 60"

    • 2007 1800 ton Schuler Used Stamping Press

      No price - Warren, MI, USA
      • Manufacturer: Schuler
      • Capacity: 1800 US ton
      • Stroke: 1100mm

      equipped with: rolling bolsters bed area: 3600mm x 2600mm | capacity: 1800 us ton | stroke length: 1100mm | strokes per minute: 8-20 | slide adjustment (powered): 530mm | shut height (above rolling...

    • 2000 220 ton AIDA Used Stamping Press

      No price - Warren, MI, USA
      • Manufacturer: Aida
      • Stroke: 7.09"

      equipped with: 30hp main motor t-slotted bolster and ram floor standing vibro/dynamic isolator pads overall height: 12' *18" coe servo feedline avaialbe at additional cost

    • 100 ton Brown & Boggs 96"x42" Used Stamping Press

      No price - Warren, MI, USA Recently Added
      • Manufacturer: Brown
      • Capacity: 100 ton
      • Stroke: 8"

      bed area: 96"x42" | capacity: 100 ton | shut height: 20.5" | stroke length: 8" | strokes per minute: 40 | slide adjustment (powered): 6"

    • 1993 250 ton Niagara 72"x54" Used Stamping Press

      No price - Warren, MI, USA Recently Added
      • Manufacturer: Niagara
      • Capacity: 250 ton
      • Stroke: 6"

      equipped with: air clutch & brake air counter balance 6" t-slotted bolster 40hp main motor coil feedline: cooper weymouth 30"x.187"x20,00lbs