• ITT Standard Model # C250 C250 #224570

    No price - West Windsor Township, NJ, USA Recently Added
    • Manufacturer: ITT Standard Model # C250
    • Capacity: 113 SQUARE FEET / 10 SQUARE METER

    113.9 sq. ft., 316 ss tubes, 316 ss tube sheet, 316 ss heads, 316ss shell, horizontal heat exchanger. manufactured by itt standard model # c250, part # 5-070-12-048-002. shell side rated for 75 psi...

  • Flowserve MARK III STANDARD

    $1,650 - Millwood, WV, USA
    • Manufacturer: Flowserve

    pump speed: 3500rpm, flow: 30.0usg, head: 100ft, power: 5hp, 460v, 3ph, 60hz. construction: 316 stainless steel casing, impeller, and shaft.

  • American Standard BCF

    $900 - Millwood, WV, USA
    • Manufacturer: American

    p/n: 5-030-03-014-005 bcf, shell max. pressure: 200psi, shell max. temp: 300 deg. f, tube max. pressure: 150psi, tube max. temp: 300 deg. f. 3" dia. housing x 17-1/2" overall length. materials...

  • American Standard WCD090C400BB

    $1,850 - Millwood, WV, USA
    • Manufacturer: American

    model wcd090c400bb, s/n-j211424530. 5 ton heat pump and air conditioner. unit has a 12 kw american standard electric heater model bayhtrp-486a. manufactured may, 1994. electrical rating 460/6...

  • American Standard WCD060C400BB

    $1,800 - Millwood, WV, USA
    • Manufacturer: American

    model wcd060c400bb, s/n-j201421360. 5 ton heat pump and air conditioner. unit has a 12 kw american standard electric heater model bayhtrp-486a. manufactured may, 1994. electrical rating 460/60/...

  • Nordberg Symons 5 1/2 Standard Cone Crusher

    No price - Warfordsburg, PA, USA
    • Manufacturer: Nordberg

    symons/nordberg 5-1/2’ std cone crusher.

  • Nordberg Symons 5-1/2 Standard Cone Crusher

    No price - Warfordsburg, PA, USA
    • Manufacturer: Nordberg

    symons/nordberg 5-1/2’ std cone crusher. symons nordberg brochure crushersplus brochure

  • 2002 STANDARD KNAPP Continuum

    No price - Ball Ground, GA, USA
    • Manufacturer: STANDARD KNAPP

    capable up to 70 tpm depending on product size and pack configuration. infeed elevation: 42" (approx.).  problue 10 hotmelt glue unit. air requirements: 10 scfm at 80 psig.  tray and film feed on l...

  • 1999 STANDARD KNAPP 930

    No price - Ball Ground, GA, USA
    • Manufacturer: STANDARD KNAPP

    capable up to 25 trays/minute depending on pack pattern and applications. maximum case width: 18.5". tray height: 2" minimum. wide side leading. product infeed elevation: 42". case discharge elevat...

  • ITT Standard 08060 SSCF-C

    $8,400 - Millwood, WV, USA
    • Manufacturer: ITT Standard

    housing dimensions: 8"ø x 60" long. tube construction: 3/8"ø (316l) stainless steel. fitted with wide baffles. 3"nptf connections.■ tube side:design pressure: 150psi, test pressure: 295psi, desi...