- Manufacturer: Spies & Schleifbaum
depth: 1300 mm | height: 1300 mm | length: 3000 mm
- Manufacturer: Peddinghaus
- Manufacturer: TOS Varnsdorf
- Manufacturer: Omes Rebar bending
type: p30ad rebar bending machine cap: 30 mm
- Manufacturer: Omes rebar cutting
for rebar cutting max: 30 mm type t000130
- Manufacturer: SGME
rebar bending machine cap: 32 mm
- Manufacturer: Leadermac P30
rebar bending machine max cap: 32 mm
- Manufacturer: Tae Yeon TYRHD25B -
multifunction spiral bender for u-bar & o-rings - u-bar >> min radius: 300mm - u-bar >> max radius: unlimited - o-ring >> min radius: 300 mm - o-ring >> max radius: 6000 mm - angle: 0° - 360° - weight: 525 kg...
- Manufacturer: Tae Yeon TACHD60A -
semi-automatic high speed cutting system for cutting hard-steel bars to length. diameters ranging from 10 to 42 mm. - max dia: 42 mm - max start barlength: 12 000 mm - max volume capacity: 1200 ton/month korean...
- Manufacturer: Tae Yeon TABHD42D -
- bending capacity: d10 - d42 mm - bending angle: 15° - 180° - over bar dia: 25 up to 42 mm - 3,7 kw - max load weight: 2 ton - speed: 5,3 m/min - dimensions: 1570 w x 1150 h x 10 000 mm l - min distance between ...
- Manufacturer: IPROLAM
- Capacity: 50.000 t/year
good working conditions -angle 40 x 40 x 4 mm ÷ 70 x 70 x7 mm -flat with bulb profile 80 ÷ 120 mm. - other equivalent sections - pusher furnace, capacity 8 t/h - one roughing stand, trio , non -reversible, ø 480 ...
machine 11585 we are pleased to offer the following for your consideration, subject to attached terms and conditions: (1) used hetran coil-to-coil rod and wire peeling/shaving line, model ws-15, new 1993 spec...
- Manufacturer: Roundo
model: r - 13s angle bending roll serial #: 96620 machine is equipped with the shafts, motors, and drives that are normally found on the r-15s model machine, but in the r-13s frame . larger than standard diameter...
Get email updates for straightening machines for bars and sections