• 16162 1998 TSUDAKOMA NC ROTARY TABLE rncm-401r

    $4,500 - York, PA, USA
    • Manufacturer: TSUDAKOMA

    tsudakoma nc rotary table price: loaded on truck, our warehouse, york, pa ………… $4,500.00 hmc stock no. 16162 machine serial no. 982292 machine model no. rncm-401r new date: new 1998 inch numbers ...

  • INLINE 45" Diameter Rotary Accumulation Table

    No price - Ball Ground, GA, USA
    • Manufacturer: INLINE

    45" diameter turntable at 29-1/2" elevation.  stainless steel construction.  motor: 1/15 hp, 90 volts, 0.84 amps.  electrical: 110v/1ph/60hz.

  • FADAL VMC 4020HT W/Fadal VH65 Rotary Table

    No price - Livonia, MI, USA
    • Manufacturer: Fadal

    2000 fadal vmc 4020ht table size:                                          47.94” x 20” rapid traverse rate (x/y):                 700 in/min rapid traverse rate (z):                     600 in/min...

  • Troyke 30″ Rotary Table

    $4,950 - Waukesha, WI, USA

      troyke rotary table model up-30 powered 30" diameter table for horizontal or vertical use with t-slots, one minute dial in 5 second increments, ratio worm to wormwheel of 1 to 180, non-influencing ...

    • SMC MSQB30A M9PL ROTARY ACTUATOR TABLE

      No price - Stevensville, MI, USA Recently Added
      • Manufacturer: SMC

      x5d-9466-gx mpn: msqb30r m9pl

    • HANCHETT ROTARY SURFACE GRINDER

      No price - Cleveland, OH, USA
      • Manufacturer: NO. 36

      magnetic chuck diameter 30" maximum diameter 39" grinding wheel diameter (8 pc segmented) 18" variable magnetic chuck speeds feeds on head approximate r.min. grinding wheel speed 700 rpm table ...

    • 3", WOTAN B75, SONY DIGITAL READOUTS, PENDANT CONTROL, BUILT IN ROTARY TABLE

      No price - Bedford, OH, USA
      • Manufacturer: Wotan

      model: b-75 / #40 specifications: spindle diameter......................... 3" spindle taper............................ no. 40 boring depth............................. 25" vertical travel...........

    • 2000 LOGANSPORT MDAT173DS-02 2-AXIS TABLE HB-17912

      $10,500 - Bethlehem, PA, USA
      • Manufacturer: SEC

      dimensions: 43.5″ (l-r) x 14″ (f-b) (20.5″ w/cable box attached to side) x 16.5″ (h) weight: 638 lbs

    • 1966 BLANCHARD 22D VERT ROTARY GRINDER CK-20427IP

      $39,500 - Bethlehem, PA, USA
      • Manufacturer: Blanchard

      blanchard one‑piece steel magnetic chuck 42″ diameter with 5/8″ pole spacing.  chuck has 2″ center hole.  chuck uses direct current only supplied by neutrofier.  230 volts dc is standard. wheel: 72...

    • 14149 78" x 70" UNION SLIDING ROTARY TABLE Ti1800

      $29,500 - York, PA, USA
      • Manufacturer: Union

      union sliding rotary table price: loaded on truck, our warehouse, york, pa …… $29,500.00 stock # 14149 serial # 1031 model # ti1800 table size: 78-3/4" x 70-7/8" with (11) 1-1/16" t-slots on 6-1/...