Used tenoner single

- 66 listings found
Sort by Price: Low to High | High to Low
  • Dominion Type BXA Five-Head Single-End Tenoner 10044

    • Manufacturer: Dominion

      Five head machine manual hand-cranks for head adjustments mechanical vertical hold-down approximately 45" table stroke

      No price
      Hughesville, PA, USA
    • Friulmac Quadramat Single-End Tenoner 10046

      • Manufacturer: Friulmac

        Single side shape and sand machine load space 642mm (25") thickness 10mm (0.4") minimum to 100mm (4") maximum dual spindle sanding units each 2.5hp feed speeds 4-30 mt/min (13-98 ft/min) feed chains 3.75" wide, r...

        No price
        Hughesville, PA, USA
      • Bacci TSG - 2T Twin Table Single Sided Round End Tenoner - 2000 CE

        • Manufacturer: BACCI

          The tsg.2t tenoning machine with two tables can produce rounded tenons with any possible angle, including vertical tenons with respect to the working table surface. max. tenon width 115 + 2r min. tenon depth 10 -...

          No price
          Liverpool, United Kingdom
        • Pade TF Twin Table Single End Round End Tenoner

              The machine is built on a solid base of electro-welded stress relieved heat treated thick steel to give maximum stability. there are two cast iron work-tables that are stationary while the cutter head moves and a...

              No price
              Liverpool, United Kingdom
            • 1998 A. costa Astra, inte/6 Squadratrice / Intestatrice doppia Automatica mod. - Automatic Double End Tenoner / Squaring with 6 tool-holder spindles

              • Manufacturer: Holder

                Squadron / double banding automatic a. costa mod. inte / 6 - automatic double end tenoner / squaring with 6 tool-holder spindles a. costa single manual feed machine for planing and squaring of parquet elements, ...

                No price
                Italy
              • 1996 Single-end tenoner

                • Manufacturer: VERTONGEN

                  Left hand machine cut off saw, 2,2kw, saw diameter 450 mm, axe 30 mm 2 x vertical spindles, 2 x 11 kw, 50 mm diameter, 545 length 2 x extra vertical spindle above and below with 105 mm length, 40 mm diameter, 2,2...

                  No price
                  Kortrijk, Belgium
                • SINGLE SIDED AUTOMATIC EDGING MACHINE SCM MOD. B4

                  • Manufacturer: SCM

                    Single sided automatic edging machine scm mod. b4

                    No price
                    San Giovanni al Natisone, Italy
                  • 1991 Single-end tenoner

                    • Manufacturer: VERTONGEN

                      Right hand machine cut off saw, 2,2kw 2 x horizontal spindles, 2 x 2,2 kw 1 x vertical spindle with 160 mm length, 50 mm diameter, 5,5 kw manual carriage

                      No price
                      Kortrijk, Belgium
                    • JENKINS 145 DOUBLE END TENONER [TE-011443]

                      • Manufacturer: JENKINS

                        Jenkins 145 double end tenoner -- 96" motorized opening with scale indicator, 5" min. (outside-to-outside of chains), -- approx. 48" infeed layup area in front of holddowns. -- 5" max. thickness opening, cent...

                        $24,500 (USD)
                        United States
                      • GREENLEE 545 DOUBLE END TENONER [TE-011445]

                        • Manufacturer: GREENLEE

                          Greenlee double end tenoner: -- 72" motorized opening w/indicator, 7" min. width, 36" load area in front of holddowns, (2) post machine. each side equipped with -- 1st station: trim/hog tilting head, 10 hp - 3,...

                          $11,200 (USD)
                          United States