Used tenonners edge banders and workcenters

- 58 listings found
Sort by Price: Low to High | High to Low
  • 2010 Edge bander single sided

    • Manufacturer: BRANDT

      Worckpiece thickness: 8-50 mm edge thickness: coils or strips 0,4-3 (max. 3 x 45 / 1 x 55) mm feeding speed: 10 m/min. power installed: 4 kw equipment: ec 10+ control high-frequency trimming motors large coil tab...

      No price
      Kortrijk, Belgium
    • 2007 Edge bander single sided

      • Manufacturer: TECNOMA

        Hot melt machine panel thickness 10 to 45 mm edge thickness from 0,4 to 2 mm min. panel length: 150 mm, min panel width: 60 mm equipment: edge magazine with guillotine glue application with glue roller lateral pr...

        No price
        Kortrijk, Belgium
      • 2000 Edge bander with squaring device

        • Manufacturer: BRANDT

          Single sided edge bander with hot melt application, fixed side at the right edge thickness: 0,4 to 5 mm edges from coil: up to 3 x 45 mm workpiece thickness: 8 to 40 mm min. workpiece width: 65 mm feedspeed 9 m/m...

          No price
          Kortrijk, Belgium
        • edge bander single sided preglued tape

          • Manufacturer: VIRUTEX

            Edge bander for pre-glued edges onto straight panels glue reactivation by hotairblower cutting of the edge by guillotine trimming top and bottom by horizontal saw end trimming of the leading edge by guillotine

            No price
            Kortrijk, Belgium
          • 1987 rotary edge bander

            • Manufacturer: BRANDT

              Rotary edge bander for the application of preglued edges to roughly trimmed workpieces. edges from coil or in strips. the workpieces can be round, rounded off, oval or with rounded off corners. possibly also work...

              No price
              Kortrijk, Belgium
            • 1988 edge bander for pre-glued edges

              • Manufacturer: HOLZ-HER

                Edges on roll scissor system pressure roller panelfeed by rollers on top (0,09 kw) moulding top and bottom (each 0,6 kw)

                No price
                Kortrijk, Belgium
              • 1992 Edge bander with squaring device

                • Manufacturer: IMA

                  Single sided edge bander with squaring device edges: 0,3 to 10 mm panel thickness: 10 to 50 mm min. panel width: 60 mm feed speed 4 - 20 m/min panel feed by chain, top pressure with rollers sound enclosures equip...

                  No price
                  Kortrijk, Belgium
                • 1996 Edge bander single sided

                  • Manufacturer: HOLZ-HER

                    Panel feed with chain, feed speed 8 and 16 m/min top pressures with rollers coil edges 0,3 to 3 mm, strips 0,3 to 13 mm. edges up to 66 mm height panel thickness 6 to 60 mm (limited to max. 45 mm for the end trim...

                    No price
                    Kortrijk, Belgium
                  • 1990 edge bander single sided

                    • Manufacturer: OTT

                      Single sided edge bander with hot melt, fixed side at the left edge thickness: 0,4 to 15 mm edges from coil: up to 0,8 x 55 mm., 3 x 45 mm workpiece thickness: 10 to 45 mm min. workpiece width: 85 mm min. panelle...

                      No price
                      Kortrijk, Belgium
                    • 2001 edge bander single sided

                      • Manufacturer: OTT

                        Single sided edge bander with hot melt, fixed side at the right edge thickness: 0,4 to 3 mm workpiece thickness: 8 to 42 mm min. workpiece width: 70 mm feedspeed 12 m/min workpiece transport by chain, top pressur...

                        No price
                        Kortrijk, Belgium