• Jet GH-1660ZX

    • Manufacturer: JET Tools
    • Distance between Centers: 60″

    the lathe is in working condition; below is a video of it in operation. it runs somewhat noisy in one of the gears (it contains spindle speeds 185/140/25) and coolant pump does not work, other than that lathe is ...

    $6,950
    Stone Mountain, GA, USA
  • 1992 Lion C10T

    • Manufacturer: Lion
    • Spindle Bore: 4-1/16″
    • Distance between Centers: 120″

    the lathe has been tested and is in working condition, below is a video of it in operation. we are glad to show under power.

    $12,500
    Stone Mountain, GA, USA
  • American 04 X 15 4' X 15" RADIAL DRILL

    • Manufacturer: American

      serial ............................... #71909-50 working surface of base .............. 60" x 42" spindle speeds ....................... (32) 20 to 1600 rpm feeds ................................ (16) .003 to .12...

      No price
      Holland, OH, USA
    • 51.25" (1302mm) FATA HUNTER COIL COATING LINE, NEW 2002

      • Manufacturer: Fata Hunter
      • Weight: 50,000 Lbs

      manufacturer - fata hunter year - 2002 status - installed in usa product - single coat roof deck coils line direction - right to left general description line speed - 200 fpm (61m/min) width range - 24" - 51.25...

      No price
      Newark, NJ, USA
    • 1966 Giddings & Lewis 954 5' X 15" RADIAL DRILL

      • Manufacturer: Giddings & Lewis

        serial ........................... 00141-66 model ............................ 954 year ............................. 1966 length of arm .................... 5' diameter of column ............... 15" working surf...

        No price
        Holland, OH, USA
      • Giddings & Lewis 6' X 19" RADIAL DRILL

        • Manufacturer: Giddings & Lewis

          serial ............................. 956-00339-78 model .............................. 6' x 19" year new ........................... 1978 working surface of base ............ 78-1/2" x 44 spindle stroke ............

          No price
          Holland, OH, USA
        • Carlton 06 X 19 6' X 19" RADIAL DRILL

          • Manufacturer: Carlton

            serial ....................... 4a1864 working surface of base ...... 77" x 50" spindle speeds ............... (36) 15 to 1500 rpm feeds ........................ (18) .004 to .125 ipr threads ........................

            No price
            Holland, OH, USA
          • Giddings & Lewis 05 X 13 953CHIPMASTER 5' X 13" G & L CHIPMASTER RADIAL ARM DRILL

            • Manufacturer: Giddings & Lewis

              serial ........................... 953-00156-64 model ............................ 953 chipmaster working surface of base .......... 70" x 44" spindle speeds ................... (36) 10 to 1250 rpm feeds ...........

              No price
              Holland, OH, USA
            • Victor 1640

              • Manufacturer: Victor
              • Distance between Centers: 40″

              the lathe is in good working condition; below is a video of it in operation. we are glad to show under power.

              $5,950
              Stone Mountain, GA, USA
            • 1967 Monarch 612

              • Manufacturer: Monarch
              • Spindle Bore: 2-1/8″
              • Distance between Centers: 144″

              lathe has been tested and is in working condition. below is a video of the machine running. we are glad to show under power. it appears the taper attachment on back of the carriage has a hydraulic element to it. ...

              $7,500
              Stone Mountain, GA, USA