Used tool holders storage

- 189 listings found
Sort by Price: Low to High | High to Low
  • 36" Bullard Cutmaster Vertical Turret Lathe

    • Manufacturer: Bullard

      One used 36" bullard cutmaster vertical turret lathe chuck diameter: 36" 3-jaw w/ bullard jaws max. swing: 44" height u/r: 30" turret head: 5-position side head: 4-way tool holder table speeds: 180 rpm main motor...

      No price
      Irvine, CA, USA
    • 2000 Titan SC 30/33 10024

      • Manufacturer: Titan

        Siemens 840c cnc control with 10.5″ color screen monitor automatic tool changer – 12 position operator panel – mechanical & software push buttons remote hand-wheel unit hard disk with min. 40 mb part storage soft...

        No price
        Marietta, GA, USA
      • 1995 KITAMURA MYCENTER 2X

        • Manufacturer: Kitamura
        • Model: MYCENTER 2X
        • Spindle Taper: .40

        20 tool atc yasnac cnc control none at this time. --x: 20" | --y: 14" | --z: 18" | weight: 6,820 lbs | rapid feed: (z) 787.4 ipm / 1181.1 ipm | tool shank: mas. bt 40 | chip to chip: 5.5 sec. min | cutting feed: ...

        No price
        Simi Valley, CA, USA
      • 2013 Mori Seiki NLX 4000Y/750 #6536

        • Manufacturer: Mori seiki
        • Spindle Nose: A2-11"

        Full c-axis and y-axis programmable servo tailstock live center auto power off spindle orientation chip conveyor tool presetter custom macro 200 variables number of tool offsets 80 sets number of registered progr...

        No price
        Huntley, IL, USA
      • 1" TORNOS ST26 FANUC 31ITB 392657

        • Manufacturer: Fanuc

          1" tornos st26, fanuc 31itb, 2013, 9-axis, lns magazine bar feed - low hours equipped with (to be confirmed by buyer: =lns alpha st320 s2 magazine bar feed =chip conveyor =parts chute/catcher =parts conveyor =fir...

          No price
          Longmont, CO, USA
        • 15099 1989 FEELER PRECISION TOOLROOM LATHE FTL-618EM

          • Manufacturer: Feeler

            Feeler precision toolroom lathe price: loaded on truck, our warehouse, york, pa ………… $16,500.00 stock # 15099 serial # 8909em106 model: ftl-618em mfgr date: september 1989 swing over ways: 11" swing over cros...

            $16,500 (USD)
            York, PA, USA
          • 2012 Doosan Puma 2600LY

            • Manufacturer: Doosan
            • Spindle Nose: A2-8

            Equipped with : - live tooling - fanuc 0i-td cnc control - 12" hydraullic chuck - chip conveyor - coolant pump - smw slu-3.2-zs hydraulic steady rest - 1280m (512kb) parts program storage - 64 tool offset pairs -...

            No price
            Novi, MI, USA
          • ERMAK CNC HVR 3100-6 1116-002177

            • Manufacturer: Ermak
            • Weight: 7060 kg

            1 brandnew hydraulic shear ermak cnc hvr 3100-134 with following equipment: - cnc controlled hydraulic blade gap adjustment system - cnc controlled cutting angle adjustment system - portable foot pedal - cnc cont...

            No price
            Hamburg, Germany
          • ERMAK CNC HVR 3100-13 1116-002176

            • Manufacturer: Ermak
            • Weight: 13300 kg

            1 brandnew hydraulic shear ermak cnc hvr 3100-134 with following equipment: - cnc controlled hydraulic blade gap adjustment system - cnc controlled cutting angle adjustment system - portable foot pedal - cnc cont...

            No price
            Hamburg, Germany
          • 165 Ton Haco Hyd. Press Brake. Ref # 9505-HK

            • Manufacturer: Haco

              Year: 1998 -model: pps165-12 -12' bed -122" between housings -3 axis cnc back gauge high speed -bc 45 controller -6" stroke -12" shut height -10" throat -merlin light curtains -foot pedal -upper and lower die ho...

              No price
              Toledo, OH, USA