• 1987 VDF Wohlenberg Hannover U1070S D 4330

    • Manufacturer: VDF
    • Spindle Bore: 5.00 in 127 mm
    • Distance between Centers: 312.00 in 7924.8 mm

    3 bedway design, 1 or 2 carriages available, 1 or 2 cnc programmable steady rests available, cnc programmable automatic compensating steady rests to 30” dual roller pass-through*actual 50”+ swing

    No price
    Washington, PA, USA
  • 1966 56" BULLARD DYNATROL CNC VERTICAL TURRET LATHE 17233

    • Manufacturer: Bullard

      fanuc 11tt cnc control ( retrofitted 1992 ) ram head and side head are each 2 axis 3 jaw chuck turret and side head km50 kennametal quick change tool holders for turret tooling 3 viking tool holders chip guards c...

      No price
      Des Plaines, IL, USA
    • 1964 52" BULLARD DYNATROL VERTICAL TURRET LATHE 15168

      • Manufacturer: Bullard

        ( with oversized table ) manual indexing five sided turret head automatic lubrication hardened and ground ways on cross rail, turret swivel variable rapid traverse to max. of 9' per minute ( height shown below is...

        No price
        Des Plaines, IL, USA
      • 2015 Doosan VT900M 5913

        • Manufacturer: Doosan
        • Spindle Bore: 4.200
        • Spindle Nose: A2-15

        x-travel: 18.50 | z-travel: 33.46 | chuck size: 32.00 | chuck type: hydraulic | spindle bore: 4.200 | spindle nose: a2-15 | spindle motor: 60 | spindle speed: 1,800 | tool positions: 12 | control options: rigid ...

        No price
        Maitland, FL, USA
      • 2002 Emco Hyperturn 690MC Plus 5553

        • Manufacturer: Emco
        • Spindle Bore: 4.200
        • Spindle Nose: A2-8

        c-axis: yes | x-travel: 19.30 | z-travel: 41.54 | chuck size: 12.00 | bar capacity: 3.740 | spindle bore: 4.200 | spindle nose: a2-8 | spindle motor: 72 | spindle speed: 3,200 | rapid traverse: 1181 | tool posit...

        No price
        Maitland, FL, USA
      • Tacchi HD3/140 27725

        • Manufacturer: Tacchi
        • Distance between Centers: 433.07"

        live milling full c-axis grinding attachment siemens 840d cnc control 4-station baruffaldi indexing turret full c-axis live milling grinding attachment powered tailstock swarf conveyor automatic pallet loading of...

        No price
        Melville, NY, USA
      • MAZAK INTEGREX 200-3ST 640MT 62581

        • Manufacturer: Mazak
        • Spindle Bore: 99"
        • Spindle Nose: A2-6

        2004 mazak integrex 200-3st multi axis cnc turning center specifications: maximum swing........................... 26" maximum swing over carriage............. 19.7" - 26" note: depends upon workpiece length,tool...

        No price
        Huntington, NY, USA
      • 1998 Mazak SQT-200MSY 27828

        • Manufacturer: Mazak
        • Spindle Bore: 2.4"
        • Spindle Nose: A2-6

        w/ c-axis, live milling, & sub-spindle mazatrol fusion 640t cnc control 8" chuck main spindle main & sub spindle synchronization tool wear compensation front door interlock & hydraulic pressure interlock 12 stati...

        No price
        Melville, NY, USA
      • YAMA SEIKI GA-3300 CNC TURNING CENTER

        • Manufacturer: Alpha

          yama seiki ga-3300 cnc turning center new 2012 equipped with fanuc oi-td cnc control with 8.4″ color lcd ac 30 hp (30 min.) fanuc alpha p40i spindle motor 2-speed motor configuration 12″ hollow 3-jaw hydraulic ch...

          No price
          Bannockburn, IL, USA
        • MAZAK-INTEGREX-300-IVS 10"CHK 2450

          • Manufacturer: Mazak
          • Spindle Bore: 46"
          • Spindle Nose: 46"

          mazak integrex 300-iv-s specifications: maximum swing / swing over cross slide.................. 26/30" maximum machining diamter (upper turret) ............... 30" maximum machining length .........................

          No price
          Deer Park, NY, USA

        Have 5 seconds to help us improve the results?

        I'll do it
        No thanks