• Warner & Swasey 4A Lever Head Saddle Type Turret Lathe #3335

    • Manufacturer: Warner & swasey
    • Model: 4A
    • Spindle Nose: A-20

    warner & swasey 4a lever head saddle type turret lathe s/n: unknown/wartime

    No price
    Houston, TX, USA
  • 1966 15" chuck Warner & Swasey Model 2A M-3470 Square Head Saddle Type Turret Lathe

    • Manufacturer: Warner & swasey
    • Spindle Bore: 4.5"

    15" chuck, tool post, turret tooling equipped with: 3 jaw chuck, tool post | longitudinal (16): .004-.149 ipm | max swing over bed: 20" | spindle speed range: 16 - 1117 rpm | maximum length turned: 36.75" | spind...

    No price
    Elk Grove Village, IL, USA
  • Warner & Swasey Model M-3500 3A Square Head Saddle Type Turret Lathe

    • Manufacturer: Warner & swasey
    • Spindle Nose: 143/8"

    15" 3-jaw chuck, tool post cross feeds: (16) 0.0025 0.082" | spindle motor: 20/40 hp | hexagon turret: with cross slide | hole thru spindle: 6.25" | longitudinal feeds: (16) 0.005 0.167" | longitudinal travel: ...

    No price
    Elk Grove Village, IL, USA
  • 1955 10 A Used Jones & Lamson Saddle Type Turret Lathe

    • Manufacturer: Jones
    • Spindle Nose: A-11

    feeds: .005 to .100 i.p.r. | weight: 14,000 lbs. | coolant: yes | main motor: 40 hp. 440 | spindle hole: 6-3/4" | spindle nose: a-11 | condition info: very good | flange holders: 3 | spindle speeds: 12 to 600 rp...

    No price
    Navasota, TX, USA
  • 1982 4 L Used Gisholt Saddle Type Turret Lathe

    • Manufacturer: Gisholt
    • Spindle Nose: A-1-20

    weight: 25,000 lbs. | coolant: yes | chuck size: 24" 4-jaw | feeds long: .005 to 176 i.p.r. | main motor: 60 hp. 230 / 480 volts | feeds cross: .0025 to .88 i.p.r. | floor space: 238" x 72" x 64" v | main motor ...

    No price
    Navasota, TX, USA
  • WARNER & SWASEY 3A #5666

    • Manufacturer: Warner & swasey

      warner & swasey 3a saddle-type turret lathe model: 3a s/n: 2168690 made in the usa read the warner swasey 3a pdf here specifications: swing over carriage:  23 1/2" maximum swing:  24 1/2" maximum distance, end of...

      No price
      Baltimore, MD, USA
    • 2006 SMS Accu-Cell AC-300-2 79489

      • Manufacturer: SMS

        2 arm overhead gantry robot transfer systems; linear scales for x and z axis; air gauge flex gauge in-line computerized gauging station; mayfran coolant pumpback system with 16" 2.2 kw single horizontal chip shre...

        No price
        Washington, PA, USA
      • 1958 Warner & Swasey #3A Turret Lathe, 6 1/4" Spindle Hole w/ DROs

        • Manufacturer: Warner & swasey
        • Spindle Nose: 59"

        equipped with: 21" 3-jaw chuck, two piece top jaws, power chuck wrench, (2) axis dro's, power rapid traverse, way covers!!, re-built in 1978, 4-position tool post, (1) short flanged tool holder, (1) long flanged ...

        No price
        Elk Grove Village, IL, USA
      • Index V-200 100534

        • Manufacturer: Index

          swing over saddle: 12.8 in (325 mm), max turn length: 15.74 in (400 mm), workpiece conveyor system - left hand mount, torit dryflo model dmc-d1 oil mist collector, width dimension shown does not include chip conv...

          No price
          Washington, PA, USA
        • Nakaumura, No. TMC-15, Fanuc OT, 6"Chk, 2 1/16", 4, 500 High Output spindle, 10 HP, 10 station turret, 1 5/8" bar capacity, new 1995 two available @ attractiv

          • Manufacturer: Capacity
          • Spindle Nose: A2-5

          four used nakamura slant bed cnc lathes model: tmc-15 swing over slide: 15.75” swing over saddle: 11.81” bar capacity: 1 5/8” hole thru spindle: 2.17” max. turning diameter: 9.25” spindle rpm: 45-4,500 rpm, high ...

          No price
          Lake Villa, IL, USA

        Have 5 seconds to help us improve the results?

        I'll do it
        No thanks