Used veneer clip guillo grind

- 20 listings found
Sort by Price: Low to High | High to Low
  • 1999 OMPEC TRO 10-3800 VENEER GUILLOTINE [VC-280271]

    • Manufacturer: OMPEC

      Ompec tro/10 ce380 12 ft. hydraulic veneer guillotine. -- maximum cutting length 150 inches; minimum cutting width 1.75 inches; motorized back-fence extends to 40.5 inches; proscale digital readout for back-f...

      $27,250 (USD)
      United States
    • MAYER FH VENEER JOINTER/SAW [VC-010417]

      • Manufacturer: Mayer

        Mayer fh veneer saw-jointer. can cut veneer packs splinter free with tight joints, with jointer-milling unit. able to provide a better joint than a guillotine. --16 ft. max. cutting length, 1-7/8" max. cutting...

        No price
        United States
      • CAPITAL 150 in. VENEER CLIPPER [VC-010385]

        • Manufacturer: LOT

          150" width cap., double-rod mechanical clutch driven with approx. 8 hp motor, twin-palm button actuation of cycle, max. (90) cycles/min; shear cut angle with angle mounted knife. -- motor mounted inside frame wi...

          $17,550 (USD)
          United States
        • SAVI HFK-400 VENEER GUILLOTINE [VC-010393]

          • Manufacturer: SAVI

            157" width cap., 3-3/16" daylight opening, motorized parallel fence adjustable from 1" to 30" (fence traverses with two lead screws), push button operated with led readout. -- hydraulically operated knife stroke...

            No price
            United States
          • 1984 CAPITAL 969 MD CROSS-GRAIN VENEER CLIPPER [VC-010245]

            • Manufacturer: Capacity

              88" cap., straight knife cut for end-grain clipping, double rod mechanical clutch dual-arm cam driven by 5 hp motor, foot pedal actuation of cycle. -- max. (90) cycles/min, motor mounted inside frame and v-belte...

              $16,430 (USD)
              United States
            • 1998 SAVI TFK-700 CROSS CUT VENEER GUILLOTINE [VC-010409]

              • Manufacturer: SAVI

                Savi tfk-700 -- 700 mm (27.6") width cap., 80 mm (3.2") daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each sh...

                $7,110 (USD)
                United States
              • 1998 SAVI TFK-700 CROSS CUT VENEER GUILLOTINE [VC-010410]

                • Manufacturer: SAVI

                  Savi tfk-700 -- 700 mm (27.6") width cap., 80 mm (3.2") daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each...

                  $7,110 (USD)
                  United States
                • 1969 RUCKLE AFN-34H VENEER GUILLOTINE JOINTER [VC-010398]

                  • Manufacturer: FAIR

                    Ruckle - afn-34h, ...veneer guillotine jointer.133" max. width x 5" opening. -- parallel veneer feed table with digital measurement indicator, hydraulically operated pressure bar. -- complete with: light line i...

                    $9,900 (USD)
                    United States
                  • 1989 MONGUZZI TI-X CROSS CUT VENEER GUILLOTINE [VC-010289]

                    • Manufacturer: MONGUZZI

                      31-1/2" width cap., 3.2" daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each sheet; green guide line light show...

                      $5,810 (USD)
                      United States
                    • 2001 FEZER GRC-370 GUILLOTINE [VC-010395]

                      • Manufacturer: FEZER

                        145" max. length cap., front fence with led readout and automatic hot melt glue applicator. -- front fence with 1" to 16" max. width for automatic feeding, pneumatic clamps for accurate parallel feeding, led rea...

                        $22,910 (USD)
                        United States