• Gildemeister CTX 410

    $40,000 - Watertown, CT
    • Manufacturer: Gildemeister
    • Model: CTX 410

    make: gildemeister model: ctx 410 swing over bed: 19.9" swing over cross slide: 14.4" max machining length: 23.6" x-axis travel: 9.8" z-axis travel: 25.0" x-axis rapid traverse rate: 945"/min z-axi...

  • 1999 Motch 115VNC CNC VERTICAL LATHE

    No price - Detroit, MI
    • Manufacturer: Fanuc

    15" motch #115vnc, cnc vert.lathe, fanuc 21it, 15" chk., 8.25"x, 17"z, 4500 rpm, '99, low price #3077

  • OKUMA HOWA 2SP-V55 TWIN SPINDLE CNC VERTICAL TURNING CENTER - Lathe

    No price - Livonia, MI, USA Recently Added
    • Manufacturer: Okuma

    equipped with fanuc 18t cnc controls, multiple part program storage, rs-232 port, (2) 12-position horizontal turrets, (2) 40 hp spindles, auto lube system, auto doors, hydraulic actuators and draw ...

  • 2006 Youji CNC Vertical Turning Center

    No price - Indian Trail, NC
    • Manufacturer: Youji

    equipped with: fanuc oi-tc cnc control* 24" 3-jaw hydraulic chuck* chip conveyor*

  • Doosan V740M VERTICAL CNC LATHE

    No price - Detroit, MI
    • Manufacturer: Doosan

    year mfg: 09/2006 swing over bed 31.5” maximum turning diameter 29.13” maximum turning length 29.92” spindle center height 42.54” travel x-axis 14.96” travel z-axis 29.92” maximum rate 236 ipm rapi...

  • 1996 Hardinge VT-100 VERTICAL CNC LATHE

    No price - Detroit, MI
    • Manufacturer: Hardinge

    equipped with: chip conveyor control: fanuc 18t | chuck size: 12″ | chuck speed: 3,400 rpm | c-axis (y/n): n | milling (y/n): n | spindle motor: 20 horsepower | x-axis travel: 7.94″ | z-axis travel...

  • 2004 Daewoo Puma V 400M VERTICAL CNC LATHE WITH MILLING

    No price - Detroit, MI
    • Manufacturer: Daewoo
    • Spindle Nose: A2-8

    15"daewoo v400m, f21it, 16.5" turn dia., 15" hyd chk, live tooling, 12 atc, 3k rpm, 30 hp, holders, 2004 equipped with: manual guide i conversational programming (3) live tool holders (2) standard ...

  • 1982 DEFUM 43” Vertical Turret Lathe

    $29,500 - Houston, TX
    • Manufacturer: DEFUM

    43” defum vertical turret lathe model kna-110/135, heidenhain dro, 4-jaw chuck, turret, side head new in 1982. serial #7330. stock # 9973a specifications for 43″ defum vertical turret lathe 43” tab...

  • 15258 1974 46" BULLAD DYNATROL VERTICAL TURRET LATHE DYNATROL

    $39,500 - York, PA
    • Manufacturer: Bullard

    46" bullard dynatrol vertical turret lathe price: loaded on truck, our warehouse, york, pa ………… $39,500.00 stock # 15258 serial # 32823 model: dynatrol new: 1974 46" diameter 4-jaw table with (4...

  • 1947 BULLARD Cutmaster 36" vertical turret lathe, High Column, 3-Jaw Chuck, Max Swing 45", Side Head

    $20,500 - Connecticut, USA
    • Manufacturer: Bullard

    bullard cutmaster 36" vertical turret lathe, high column 3-jaw chuck swiveling turret head 30 deg. swing with side head 39" max swing 45", side head below table side head speeds 3.3 - 240 rpm t.d.a...