• SCMI R8 Pin Router

    $1,995 - Sheboygan, WI, USA
    • Manufacturer: SCM

    6.6 hp, 230 v, 3 phase 10,000 or 20,000 rpm 1/4" to 5/8" collet size 6 adjustable spindle depths 4" spindle travel 29.5" throat depth 30" x 36" non-tilting cast iron table 7-7/8" vertical table mov...

  • Onsrud RO-117H Pin Router

    $1,895 - Sheboygan, WI, USA
    • Manufacturer: C.R. Onsrud

    26" throat capacity and 4-1/2" max. material thickness 3 hp motor belt drive dynamically balanced spindle @ 20,000 rpm 1/4" - 3/8" & 1/2" collet sizes 20" x 32" table size with forward tilt 4-1/4" ...

  • Weeke BHC 250 CNC Router

    $32,000 - Sheboygan, WI, USA
    • Manufacturer: Weeke

    spindle needs to be reconditioned one floor mat to be checked and repaired both repairs can be covered with your stiles tech on installation must-sell; weighing all offers 10 vertical drilling spin...

  • BIESSE CNC ROUTER-ROVER B 4.40 FTK

    $58,995 - Grand Rapids, MI, USA
    • Manufacturer: Rover

    1-used biesse rover b 4.40 ftk cnc machining center. working field: x= 145″, y= 54.3″, z= 5.9″, precision machined table, 3 back reference pin stops, 1 slide reference pin stop (lh side), centraliz...

  • 1999 SCM Routech R-250 CNC Router

    $49,950 - Sheboygan, WI, USA
    • Manufacturer: SCM

    priced reduced from $69,950! 2 work tables, measuring 61.5" x 125", gap between tables 4.5" 10' parts can run left to right or front to back feed speeds accelerate at 2300 inches per minute no manu...

  • HOLZ-HER VERTICAL CNC MACHINING CENTER-EVOLUTION 7405-K

    No price - Grand Rapids, MI, USA
    • Manufacturer: Holz-Her

    machining in x-direction routing/profiling up to 57″ without re-clamping horizontal drilling up to 51″ without re-clamping maximum work piece length without additional support: 11-1/2′ with additio...

  • CR Onsrud Model 288G12 Panel Pro Series CNC Router

    $125,000 - Grand Rapids, MI, USA
    • Manufacturer: C.R. Onsrud

    one used c.r. onsrud model 288g12 “panel pro series” cnc router (325"x61” axis travel) - with: oversized extra thick cast-iron fixed bridge & oversized extra thick cast iron vertical supports, th...

  • Her-Saf 144, 4 x 10 Back Fence Cap., Vertical Panel Router, 110V, 1PH, Cleaned, Checked

    $1,700 - United States
    • Manufacturer: SAF

    upper midwest her-saf 144, 4 x 10 cap., vertical panel router, 110v, 1ph   cleaned, checked    48" vertical routing cap. and unlimited horizontal routing capacity   2" max. material thickness.   15...

  • Onsrud A-1136 Vertical Pin Router 5553

    No price - Hughesville, PA, USA
    • Manufacturer: C.R. Onsrud

    manual hand-crank for table raise/lower foot pedal operation

  • SCMI R9 Automatic Vertical Pin Router 5625

    No price - Hughesville, PA, USA
    • Manufacturer: SCM

    36" throat manual table raise/lower via hand-crank foot pedal spindle stroke push-button controls air blow-off