search
  • 1,200 gallon water tank, chemical inductor and pump on Minnesota wagon

    $2,475 - Vermillion, MN

      used minnesota 10-ton wagon running gear, 125lx15 10-ply tires with tubes on 15" x 10" rims, extension tongue, 14-foot flatbed rack with three main stringers, 1,200 gallon vertical tank with chemic...

    • 330 Gallon Square Holding Tank 12176

      No price - Ball Ground, GA

        ss vertical tank - 3' x 3' x 5' straightwall. 8' overall height. 5 hp centrifugal pump with 2-1/2" tri-clamp inlet and 2" triclamp outlet.

      • 823 CFM SIHI Vacuum Pump 8082

        No price - Red Bank, NJ Recently Added
        • Manufacturer: SIHI

        used 823 cfm (1400 cbm/hr) @ 200 mbar, sihi type lphy 75330 cs two stage water seal vacuum pump system. pump driven by 50 hp 3/60/230/460v 1770 rpm tefc motor. skid mounted systems includes a 40 ...

      • Oakes Mixer Paste Vertical 30SMV151 R26320

        No price - Carol Stream, IL
        • Manufacturer: Oakes

        et oakes model 30smv151 continous, stainless steel, slurry mixer and transfer system rated to 500 lb batches with 4 to 9 minutes mix times per batch – depending on materials and application. 28" i...

      • Oakes Mixer Paste Vertical 30SMV151 5F5794

        No price - Carol Stream, IL
        • Manufacturer: Oakes

        et oakes model 30smv151 continous, stainless steel, slurry mixer and transfer system rated to 500 lb batches with 4 to 9 minutes mix times per batch – depending on materials and application. 28" i...

      • 700 Gal Stainless Steel Tank 6242

        No price - Red Bank, NJ Recently Added
        • Manufacturer: Unknown
        • Capacity: 700 Gal

        used 700 gallon stainless steel sanitary vertical open top tank, dual jacket (side wall jacket leaks - not repairable), bottom jacket ok, 53" diameter x 74" straight side, dish bottom 6" deep, has ...

      • LEROI TRU-7.5A COMPRESSOR TWO-STAGE TANK MOUNTED AIR 5 HP

        $2,750 - Bethlehem, PA
        • Manufacturer: Leroi

        specifications motor: 5 hp, two stage pump tank: vertical tank capacity: 80 gallons electrics: 220 volts, 3 ph, 60 cyc

      • CDS MODEL CVC22-575 4 COMPARTMENT VACUUM TANK

        No price - Elk Grove Village, IL

          cds model cvc22-575 4 compartment vacuum tank, s/n 021198, 460 volt 3-phase operation with 81 amp total load, stainless steel construction, one 7.5 hp water recirculation pump, 4 7.5 hp vacuum pump...

        • 1995 LEADWELL MCV-760AP VMC VERTICAL MACHINING CENTER WITH FANUC OMF CONTROL, 30″ X 20″ X 20″

          $9,500 - Bethlehem, PA
          • Manufacturer: Leadwell
          • Spindle Taper: ISO #40

          specifications table working area: 39.4″ x 19.7″ t-slots (5): 0.7087″ x 4″ pitch maximum load on table: 1,102 lbs floor to table surface: 31.89″ movement & range x-axis travel: 29.92″ y-axis travel...

        • Bridgeport 1095 C-360/3D Vertical Knee Mill Dual Head with True Trace

          $6,750 - Walla Walla, WA Recently Added
          • Manufacturer: Bridgeport

          dual head w/ model 1095 c-360/3d true-trace head serial no's.: ...j-135524 ...j-135525 table: 60" x 10" w/ 24" extension 8-speed step heads (pulley) spindle rpm: 80 - 2720 (8 speeds within th...