• Copper Beer Brewing Fermentation/Mash/Water/Air 1500 Gal. Fermentation/Mash/Water/Air/Pressure/Holding Tank

    $20,000 - Fleetwood, PA, USA
    • Manufacturer: Copper

    1500 gallon copper beer brewing fermentation/mash/water/air/pressure/holding tank this tank is used and appears to be in fair condition. ...

  • 11 Gallons Intensive Mixer #46421

    No price - West Windsor Township, NJ, USA Recently Added
      • Capacity: 11 GALLONS / 42 LITERS

      unused 160 litre (40 gal) jkt high intensity cs/ss mixer. mfd by trusioma (germany), mdl 160lmk200r-75, sn 12116015. counter motion mixing blades. mixing bowl cs, mixing blades ss. jkt for steam or...

    • ZIMMERMAN ZM-4101-SP LATEX VOLUMETRIC MIXER UNIT

      $125,000 - Pennsylvania, United States
      • Manufacturer: ZIMMERMAN

      mounted on sterling model lt9500 truck chassis, vin # 2f2hazcv77ay69756 (2008), zim-mixer rated @ 30 cu . yds/hr., 390 cu. yd split aggregate bin (sand & stone), with bin vibrators; 113 cu. ft ceme...

    • Dionex EG50

      No price - Cridersville, OH, USA
      • Manufacturer: Dionex

      phone: 1-567-221-0615 traditionally, the acid or base eluents are prepared off-line by dilution from reagent-grade chemicals. this process can be tedious, prone to operator errors, and often intro...

    • 2000 KENWORTH W900

      $27,500 - Kansas, United States
      • Manufacturer: Kenworth
      • Model: W900
      • Mileage: 170,000 mi

      2000 kenworth w900 *cummins ism/10.8l/335 *14,000 hours (approx) *170000 miles(approx) *248" wheelbase *4.56 ratio *chalmers rubber block suspension *ef 9ll transmission *20-50% tires *30-50% brake...

    • used APV Baker Perkins Model MP80 Twin Screw mixer/extruder

      No price - Penns Grove, NJ, USA
      • Manufacturer: APV

      used apv baker perkins model mp80 twin screw mixer/extruder. 80 mm screws with 25:1 l/d ratio. typical outputs 1500-2900 (kg/h). (6) zone electrically heated, water cooled. max operating temp. 20...

    • Bolz 50L 316SS Cone Screw Dryer-Mixer system designed for R&D, Pilot, or small scale production

      No price - Penns Grove, NJ, USA
      • Manufacturer: BOLZ

      bolz 50l 316ss cone screw dryer-mixer system designed for r&d, pilot, or small scale production. this is a very nice turnkey system that includes the 50l size unit mounted into a frame, vessel can ...

    • 1993 CURBMASTER 3200SFB

      No price - Sergeant Bluff, IA, USA Recently Added
      • Manufacturer: CURBMASTER

      curb master 1993 3200sfb slipform paver option: 1 - 14'-32' paving widths option: 2 - including hydraulic crown adjuster option: 3 - hyd. telecoping main frame 4'6" per side: 9' total option: 4 - 1...

    • 1996 GOMACO GHP2800

      No price - Sergeant Bluff, IA, USA Recently Added
      • Manufacturer: Gomaco

      gomaco 1996 ghp2800 slipform paver option: 1 - 5000series open front recond./repainted 29'6" mold option: 2 - two 5' drive sections, left and right option: 3 - two 36" inserts option: 4 - two 24" i...

    • Waukesha Shear Mill Sp-4 #15756

      No price - Marlboro Township, NJ, USA
      • Manufacturer: Waukesha

      waukesha in line shear mill model sp-4, serial # na. features 316 stainless steel wetted parts, rated for 30 gpm capacity, 150 psi up to 300 f capacity, maximum speed 3600 rpm, 2" inlet and outlet ...