• 2012 Automa Power66 Welding turntable

    $728 - Baden-Württemberg, Germany Recently Added
    • Manufacturer: Automa

    turntable positionervorrichtungen capacity 100 kg with a direct current motor rotation. pan manually. bea2y

  • 2002 Oerlikon Posisaf 60B Welding turntable

    $21,941 - Lohr a. Main, Germany
    • Manufacturer: Oerlikon

    with a capacity of 6 t incl. support bracket with diameter min. 75mm - max 1515mm the spinner had max. 200 hours use absolute top condition (changes and mistakes in the technical data, specificatio...

  • Welding Turntables

    No price - Mannheim, Germany

      welding turntables used machine welding turntable manufacturer unknown very heavy duty carrying capacity an estimated 10to 4 speeds with following steps: a rotation of 15 minutes a turn 12 minutes ...

    • EDAL RS 360-1000 motorized welding turntable - 360 x 1000 mm

      No price - Herning, Denmark
      • Manufacturer: EDAL

      condition: used. make: edal. type: rs rigin: denmark the welding diameter: diameter: 360 mm. weld length: 1000 mm. with variable rate of turn, chuck, ground cable and gun mounts

    • 6,000 Lbs. K.E.C. Flat Floor Turntable W/ Machined Table Top

      No price - Navasota, TX
      • Manufacturer: KEC
      • Capacity: 6,000 Lbs.

      control: hand pendant | voltage: 110 volt | capacity: 6,000 lbs. | rotation: variable speed | over all height: 19.3/4" | floor dimensions: 48"x48" | spindle surface area: 31" | table diameter can ...

    • 1985 PROTAC ZAAR PT-DTHV 5000 Welding turntable

      No price - Wiesbaden, Germany
      • Manufacturer: PROTAC ZAAR
      • Weight: 6500 kg

      lightly used and well-preserved welding turntable with hydraulic height adjustment and hydraulic swivel faceplate electr. u. hydr. device, mobile operating switches, foot switches, special jig, ope...

    • 10,000 Lbs. Weldwire Flat Floor Turntable For Welding

      No price - Navasota, TX
      • Manufacturer: Cleveland
      • Capacity: 10,000 Lbs.

      drive: cleveland pm1 | voltage: 110 volt | capacity: 10,000 lbs. | rotation: variable speed | table diameter: 60"

    • NN Manipulator/Turntable 32 ton

      No price - Deinze, Belgium Recently Added
      • Manufacturer: NN

      turntable / manipulator for large workpieces, on rails. equipped with demag motorsdiameter of rails: 5270 mm length of chassis: 5050 mm width of chassis: 2670 mm height of chassis: 690 mm

    • Protec 3000 welding turn table

      $7,157 - Hergensweiler, Germany
      • Manufacturer: Protec

      welding turntable, turntable, positioner assembly table, grinding table capacity approx 3 ton. with control panel, handheld remote control, foot remote control, mounting holes for aufpratzen, or st...

    • ISLAND ROBOT KUKA KR6 WELDING

      No price - Veneto, Italy Recently Added
      • Manufacturer: KUKA

      erregi 2 industrial robots island has used controlled kuka for continuous wire welding mig-mag, composed dastruttura for housing the robot base with translation in on-off mode, kuka robots kr6 mode...