Used Processing in British Columbia, Canada

42ft Storage Building

Warehouse building.10 ' x 10' roll up door Pasc condition rating: B | Skidded: No | Connection status: Connected | Building type: Storage | Building width: 26ft | Building length: 42ft | Building dimensions: 42ft...

1989 600 hp Superior 6G-825 Superior MW-62 Reciprocating Compressor

• Manufacturer: Superior

Service type: Sweet | Pasc condition rating: C | Skidded: Yes | Trailer mounted: No | Housed: Yes | Connection status: Connected | Vru application: No | Compressor type: Reciprocating | Compressor make: Superior...

1989 500 bbl Storage Tank

• Manufacturer: GLM Tanks and Equipment

Service type: Sweet | Pasc condition rating: C | Skidded: No | Housed: No | Connection status: Disconnected | Capacity: 500 bbl | Capacity(unit of measure): bbl | Tank type: Storage Tank | Insulated: No | Coated...

1989 200 bbl Storage Tank

• Manufacturer: GLM Tanks and Equipment

Secondary containment full of water. Bottom support unknown.

1989 5000 bbl Storage Tank

• Manufacturer: GLM Tanks and Equipment

Package id: 12330521 | Service type: Sweet | Pasc condition rating: C | Skidded: No | Housed: No | Connection status: Connected | Capacity: 5000 bbl | Capacity(unit of measure): bbl | Capacity(use selected unit ...

1989 0.75 MMBTU/hr Sweet Line Heater

0.75MM BTU Line Heater Package id: 13044049 | Packager: Presson | Service type: Sweet | Pasc condition rating: C | Skidded: Yes | Housed: Yes | Connection status: Connected | Units available: 1 | Heater type (ind...

STEP FEEDER

- Double acting step feeder - Six (6) steps approximately 10 feet long - No end walls - Electrically driven (drive not included) - Disassembled

36" x 48" Falcon Rotary Hog

• Manufacturer: Falcon RME

- Built in 1992 by Clarkes - Drop feed - 36" x 48" Rotary Hog c/w fixed hammers - Two (2) 8V-8 groove sheaves on rotor - No motors included (originally driven by two (2) 250 HP motors) - Cylinder operated hinged ...

20' x 60' Roof Top Pull Chains (2 only)

• Manufacturer: Canadian Mill Equipment

- Five (5) runs of roof top chain c/w rollers on side - Approximately 50' long - Electric motor/reducer drive unit - Still installed

15' Double Screw Conveyor

- 15' x 36" wide - Dodge gear box - Motor removed

8" x 35' Screw Conveyor

- No drive

12" x 16' Belt Conveyor

- Fabricated steel trough 13" wide x 9" deep - Belt - Head and tail pulley - 5 HP electric drive

30" Troughing Conveyors - Bridge Type

- Approximately 7' wide x 7' high c/w catwalks - One (1) section 96' long - One (1) section 126' long - 30" wide troughing rolls (approx. 3'-9" c/c) - No drives - No head and tail pulleys

36" Conveyor

- Truss type - Covered with catwalk - c/w two (2) sets of drives & belt - 40'-0" sections - 500" feet available

36" x 45' Troughing Roll Conveyor

- Channel frame construction - Approx. 45' long (two sections) - 25 HP drive assembly (no motor) c/w head pulley - Tail pulley - Belt