• 1971 KELLENBERGER 1000U UNIV CYL GRINDER HB-20506

    $29,500 - Bethlehem, PA, USA
    • Manufacturer: Kellenberger

    dimensions: 56” lr x 38” fb x 77” h weight: 5,600 lbs electrics: 230 volts, 3 ph, 60 cyc internal spindle 9 piece set of drive dogs 8” 3-jaw chuck with top reversible jaws tailstock with swing down...

  • 1998 CLAUSING CSG-618 SURFACE GRINDER CK-20548

    $7,950 - Bethlehem, PA, USA
    • Manufacturer: Clausing
    • Grinding Length: 19″

    maximum travel, manual: 20″ manual transverse travel, max.: 7-3/4” hand wheel per revolution: 0.2″ hand wheel per graduation: 0.001″ hand wheel per revolution: .04″ hand wheel per graduation: .0002...

  • 1968 COVEL 10H SURFACE GRINDER TK-20499

    $6,950 - Bethlehem, PA, USA
    • Manufacturer: Rapid

    height – floor to table: 41” dimensions: weight: 2,500 lbs electrics: 208 volts, 3 ph, 60 cyc acu-rite d-200 2-axis digital readout 6” x 18” permanent magnetic chuck bijur one-shot lube

  • 1968 COVEL 10H SURFACE GRINDER TK-20500

    $6,950 - Bethlehem, PA, USA
    • Manufacturer: Rapid

    height – floor to table: 41” dimensions: weight: 2,500 lbs electrics: 208 volts, 3 ph, 60 cyc acu-rite d-200 2-axis digital readout 6” x 18” permanent magnetic chuck bijur one-shot lube

  • 1980 TONGIL TGU27 UNIV CYL GRINDER JK-12161

    $13,900 - Bethlehem, PA, USA
    • Manufacturer: TONGIL

    swivel of workhead: 360 degrees (120 degrees gauged) swing over table: 10.6″ grinding length between centers: 20″ diameter ground with new wheel (max): 6″ workpiece weight(max): 286 lbs workhead sp...

  • 2000 TARNOW RUP-28X500 UNIV CYL GRINDER TK-20451

    $26,500 - Bethlehem, PA, USA
    • Manufacturer: TARNOW
    • Weight: 44 LBS

    dimensions: 16” x 2” x 5” minimum worn grinding wheel diameter: 10.25” grinding wheel spindle speeds: 1,850 – 2,180 rpm main drive motor: 7.5 hp swivel angle toward footstock/workhead: 30°/30° hand...

  • 2002 GLEBAR CAM-SXE CNC CENTERLESS GRINDER JV-20018TK

    $49,500 - Bethlehem, PA, USA
    • Manufacturer: CAM
    • Grinding Length: 8”

    machine dimensions, approx: 48″ lr x 68″ fb x 79″ h electrics: 220 volts, 3 ph, 60 cyc multi axis servomotor positioning system variable speed 3 hp spindle continuous feed capability built in part ...

  • 2003 DANOBAT TOP-63 SURFACE GRINDER JV-20232TK

    $34,500 - Bethlehem, PA, USA
    • Manufacturer: Danobat
    • Grinding Length: 23.6″

    magnetic chuck size: 11.8″ x 23.6″ regulable speed range: 3.3 – 131 fpm maximum weight on table: 880 lbs programmable speed: .2 – 1.3 ipm continuous cross speed: .4 – 118 ipm grinding wheel size: 1...

  • 2007 SUPERTEC PLANOTEC 1224NC SURFACE GRINDER CK-19867

    $23,900 - Bethlehem, PA, USA
    • Manufacturer: SUPERTEC
    • Grinding Length: 26”

    manual traverse: 28″ hydraulic traverse: 26″ table speed (infinitely variable): 10 – 82 fpm rapid traverse: 40 ipm automatic traverse increment: .02” – .32” automatic cross traverse: 14” manual cro...

  • 1966 BLANCHARD 22D VERT ROTARY GRINDER CK-20427IP

    $39,500 - Bethlehem, PA, USA
    • Manufacturer: Blanchard

    blanchard one‑piece steel magnetic chuck 42″ diameter with 5/8″ pole spacing.  chuck has 2″ center hole.  chuck uses direct current only supplied by neutrofier.  230 volts dc is standard. wheel: 72...