Used Processing in Estonia

United Studio Technologies UT TWIN87 Condenser Microphone

Painstakingly recreated with the utmost attention to detail; United's take on both vintage and modern variants of a very classic and much desired condenser microphone that has been used on countless hit records. ...

Neumann TLM 67 Large Diaphragm Condenser Microphone

The TLM 67 captures the spirit of Neumann’s classic U 67, which defined the sound of the 1960s. But instead of electron tubes the TLM 67 relies on trouble free FET electronics with a special sound design for a go...

Microtech Gefell MV691/M70 12Volt Condenser Microphone, N691 PSU

Originally introduced in 1973 as the successor to the MV 690, the MV 691 is a transformer-coupled FET microphone amplifier and a key component of the SMS 70 (Studio Microphone System) series. Designed without a f...

Microtech Gefell MV692/M94 Cardioid 12Volt Condenser Microphone, N691 PSU

Neumann KM86i FET Condenser Microphone from 1967

The Neumann KM86 is a compact condenser microphone featuring a dual-capsule head assembly. It offers three selectable polar patterns—omni, cardioid, and figure-8—via a switch located just below the capsule assemb...

Sawn timber packs driving rollerconveyor

• Manufacturer: Correa

L=9 m

Hydraulic packpress Goliat

(Sweden), incl strapping frame, electric cabinet with Siemens S7 truck sticks (100x75x1200 mm) infeed device, hydraulics, cleaned, checked, working condition

Universal Audio Bock 167 Tube Condenser Mic w/ PSU

The UA Bock 167 is Universal Audio’s large-diaphragm tube condenser mic, built to give vocals and instruments the classic smooth tone of the legendary U67.* Handcrafted at the UA Custom Shop in California, with e...

Vanguard Audio V44S Gen 2 Stereo Twin 3-pattern Fet Condenser

The new V44S gen2 Multi-Pattern Stereo FET mic, like ALL of the gen22 releases, has been given a significant improvement in both sonic performance and it’s fit and finish. The V44S gen2 stands alone in the field ...

Centering infeed conveyor Söderhamn 447

With log rotation, for logs and cants. Centering infeed conveyor Söderhamn 443 for cants and squares, renovated.

Chipper canter reducer discs

3 spiral and combi discs, renovated

Conveyors

Beltconveyor, length 7 m. width of the belt 600 mm. Kicker logconveyor to the left, length 8 m. Vibro conveyor lenght 9 m, Width 400 mm

Board singulator

Single and double

Chips screen TS-040

From 2000, 3 fractions - big pieces, quallity chips, sawdust Capacity up to 25 m3/h, outfeed scraper conveyor 120 m

2009 Almig German GS 15

• Manufacturer: Almig
• Noise level: 69 decibel

Compressor is in good condition. During the maintenance has been exchanged the oil, oil filter, air filter and V-belts. - Compressor is compact - Simple construction and reliable - Compressor have control unit Ai...