1998 CEFLA ECOSPRAYER EASY D 4'WIDE FEED THROUGH SPRAY - RECIPROCATING [FE-010871] in United States
- United States
- $45,000 USD
- ECOSPRAYER EASY D 4'WIDE
CEFLA ECOSPRAYER W THIS MACHINE IS PARTICULARLY SUITABLE FOR THE APPLICATION OF WATERBORNE AND UV DRYING LACQUERS: THESE PRODUCTS ASSURE MINIMUM ENVIRONMENTAL IMPACT.
-- Automatic spraying system ECOSPRAYER EASY W is mainly based on the use of a closed continuous CFB belt conveying the panels to the spray area. The design has many advanced mechanical solutions to allow considerable advantages.
-- Technical Features: Fully pressurized spray cabin, belt lacquer recovery system, Microprocessor unit for spraying operation control, A scrubber washing tower for environment protection.
-- Includes: (2) KREMLIN Pumps with (4) A/A Guns; variable speed & acceleration from the control panel.
-- 5-Edge coating 51" max. width, 86" long spray enclosure.
-- Gun Carrier: Reciprocating-type linear Gun carrier for (8) guns. Includes: (2) Stations for (4) guns per station, Clamps & brackets for free height and angle settings. Two opposite guns supporting trolleys driven by toothed timing belts with brushless motor with electronic control, reciprocating slider, automatic reversal of gun angle on each stroke to cover panel edges, with variable speed. These trolleys can accept 4 + 4 guns. Two lacquer feeding circuits with filter and recycle system.
-- Light barrier Gun Control: Photocell sensors send material size to the programmable controller which opens and closes the guns.
-- Conveyor System: Solvent-proof continuous belt made in CFB, with long life and easily removable infeed roller section with electronic reading barrier consisting of 60 photo-diodes and outfeed roller tiltable element for maintenance, Belt width 1,650 mm, total length 6152 mm, forwarding speed 1.6 - 10.6 m/Min, driving power 1.2 Kw.
-- Movable belt cleaning (recovery) trolley: Chromium-plated reverse roller with electronic control of the position, Mechanical oscillating scraper for product removal from the chromium-plated roller and pneumatic device for overspray collection, Removable trolley with final counter-rotary rollers for the automatic and continuous belt cleaning. Automatic cleaning solvent feeding.
-- Booth Enclosure: Made of sandwich paneling with glazed elements. Port for access to the spray guns units. Length 2,200 mm. Width 4,280 mm. machine body height/max. 2,812/4,100 mm. Upper air diffusion plenum connected with (1) air inlet fan (air intake from -inside) with filters EU3 total flow rate 10000 m3/h, total power 3 Kw., Over-spray suction system: Suction tower Exhaust fan flow rate 12000 cbm/Hr, power 7.5 Kw.
-- Economy of this unit: The lacquer that is not applied on the panels is not discharged into the water but deposits on the belt and can be recovered and reused: lacquer recovery is carried out by means of a patented system with counter-rotation roller, scraper and pneumatic device for coating collection in a proper tank, The continuous belt cleaning system assures maximum efficiency and reduced maintenance.
-- The machine is particularly suitable for the applicat
Get email updates for Cefla ECOSPRAYER EASY D 4'WIDE