2000 ROBOTICS FINISHING SYSTEM PRE-TREATMENT

2000 ROBOTICS FINISHING SYSTEM PRE-TREATMENT AND OVEN SYSTEMS [FS-010420] in Canada

Location:
Canada
Price:
$349,500 USD
Manufacturer:
ROBOTICS
Model:
FINISHING SYSTEM

Specifications

Condition:
used
Year:
2000
Recnum:
FS-010420
Comments:
Complete Powder Coating Finishing Line from Cleaning to Drying!
Machtype:
PRE-TREATMENT AND OVEN SYSTEMS
Condition info:
(6-8) Very good condition [6]
Current status:
Active
Elect./voltage:
600 V, 60 Cy, 3 Ph.
Appr. repl. cost:
1.6e+006

Description

ROBOTICS Complete Powder Coating Line consisting of:Conveyor, water reservoir, pumping station, pre-treatment system, dry-off oven, curing oven, shaker/powder feeder, liquid paint booth and inspection booth.

-- Allied Conveyor with 4" I-beam support structure; (2) drive motors with chain oiler (model PL 5,000); chain oiler located prior to pre-treatment. Approx. 990' of chain, 2' spacing between wheels, 700 Lbs capacity.

-- Pre-treatment system (L-shaped) 105-1/2' L x 52-1/2' W x 7' H; part opening 5' W x 6' H.

-- Stage #1: Natural gas heated, 1,500,000 BTU, 15 HP pump, 2,151-gal. tank, drain & Stage #2: Ambient, pump 7.5 HP, 806 US Gal., drain back 6' prior and 10' after, tank dimensions of 8' x 6' x 2.7', (6) risers.

-- Stage #3: Ambient, pump 7.5 HP. 806 US Gal., drain back 6' prior and 10' after, tank dimensions 8' x 6' x 2.7', (6) risers.

-- Hot water reservoir, Natural Gas heated, 1,500,000 BTU, 10 HP pump, 1,211 US Gal., tank dimensions 10.3' x 7' x 2.7' (model "V-28SST-100").

-- Heat Exchanger: (2) 10 HP Pumps, 1,387 US Gal., tank 10' x 8-3/4' x 2.7', drain back 6' prior and 5' after.

-- Stage #4: Designed for Zinc Phosphated application; (2) sludge collection "cones" are located on the bottom of stage #4; air operated "diaphragm type" pumping station to remove sludge from under stage #4.

-- Stages #5, #6 & #7: Ambients, 672 US Gal., tank dim. of 8' x 5.2' x 2.7'; dimensions of pre-treatment system 104-1/2' long x 52-1/2' x 7'.

-- Dry-Off oven 80' L x 8' W outside dimension. Part opening of 5' W x 6' H; 4,250,000 BTU, air curtains on entrance and exit.

-- Curing Oven: Length of 82' (loop) part opening 5' W x 6' H, 4,350,000 BTU.

-- FIM Controls - Stage #1: Heater, temperature controls; Stage #4: Heater, temperature controls; Entrance/exit air curtains, Heat exchanger circulation; Stages #1 - 7: Spray pumps; Dry-Off/Oven controls; temperature controls for ovens; Conveyor On/Off and speed control.

-- Powder Equipment: Shaker/powder feeder, gun, control power pack, booth, fan/cartridge; 13' x 7' inside dimensions.

-- Liquid paint "down draft" booth: 30,000 CFM, part opening of 5' L x 6' H; dimensions 12.3' x 20.3'.

-- Inspection booth: Air circulated, (40) neon lights, dimensions of 13' x 11'.Line is disassembled & ready for shipment; Technical support can be arranged and transformer for 460 or 30 Volt operation available.