2004 COMIL STAR 200B SHRINK

2004 COMIL STAR 200B SHRINK WRAP LINE [MH-010738] in Canada

Location:
Canada
Price:
$37,500 USD
Manufacturer:
COMIL
Model:
STAR 200B

Specifications

Condition:
used
Year:
2004
Recnum:
MH-010738
Comments:
They have (2) machines and are open to offers
Machtype:
SHRINK WRAP LINE
Condition info:
(3-6) Good condition [6]
Current status:
Active
Elect./voltage:
600 V, 60 Cy, 3 Ph.
Appr. repl. cost:
139000

Description

COMIL STAR 200B Shrink Wrap System for large items such as Sofas & Case Goods.

-- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station.

-- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure.

-- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt.

-- Working Dimensions: Welding bar length is 3,300 mm, upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57").

-- Feed belt width is 1,500 mm, infeed & middle conveyor is 2,400 mm long, max. working height is 300 mm; working table height is 800 mm; variable belt conveyor speed from 3 - 15 MPM by inverter; free-standing control panel.

-- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution.

-- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film.

-- Shrink tunnel length is 4,700 mm, mesh conveyor is 4,700 mm (185") long x 1,800 mm (70-3/4") wide, tunnel will accept 300 mm (11.8") max. part height, working table height is 800 mm.

-- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping.

-- Equipped with: SIRIO Welding Station; actual model is "New Star 200B".

-- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase.

--