2004 COMIL STAR 200B SHRINK WRAP LINE [MH-010739] in Canada
- $37,500 USD
- STAR 200B
COMIL STAR 200B Shrink Wrap Line. For large items such as sofas & case goods.
-- Product is automatically carried to unwinding unit for top & bottom wrapping with film, welding / cutting of film on the rear part of the productis performed.
-- Wrapped product is then transfered to the tunnel for film shrinking, the edge pressing rollers at the out-feed of the tunnel, collect the excess film and press it against the shrink wrapped product.
-- Wrapping station: PE shrink film in-feed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by tooth belt.
-- Working Dimensions: Welding bar lenght is 3,300 mm, upper foil roll max. width is 2,150 mm, lower foil roll max. width is 1,450 mm.
-- Feed belt width is 1,500 mminfeed & middle conveyor is 2,400 mm long, max. working height is 300 mm, working table height is 800 mm, variable belt conveyor speed from 3 - 15 MPM by inverter, free standing control panel.
-- Heat tunnel: Welded sheet metal structurewith insulated cavaties for minimum heat loss, (2) heating units with armoured electric resistance, centrifugal fans for uniform heat distribution.
-- Teflon coated mesh conveyor belt, gear motor driven by inverter, spring loaded edge pressing unit at out-feed end of tunnel to press overhanging film.
-- Shrink tunnel length is 4,700 mm, mesh net conveyor is 4,700 mm long x 1,800 mm wide, tunnel will accept 300 mm max part height, working table height is 800 mm, variable mesh belt conveyor speed from 3 - 15 MPM by inverter, out feed conveyor with powered driven rollers & speed control by inverter for cooling down the items after shrink wrapping.
-- Sirio welding station, serial# KCOR 400-088.
-- Actual model is "New Star 200B".
-- Total power required 86 AMPS, 60 Hz, 50 Kw on 600 volts 3-Phase.
Get email updates for COMIL STAR 200B