1995 SELCO WNA 200 ANGULAR PANEL SIZING PLANT [PA-019109] in MTN/CENTRAL CDN
- MTN/CENTRAL CDN
- $65,000 USD
- WNA 200
Selco WNA Angular Saw; 173" (4,400 mm) Rip cap., 86" (2,200 mm) cross-cut cap.; 5.2" (132 mm) max. saw blade projection.
-- Rip-cut & Cross-cut Saws: Each section with its own 30 HP (22.3 kW) main saw motor, 18.9" (480 mm) dia. main blade; 3 HP (2.2 kW) scoring motor, 7.8" (200 mm) dia. scoring blade.
-- Rip-cut & Cross-cut section with: AC Servo Brushless saw carriage drive motors, travel speed 0 - 492 FPM (0 - 150 MPM) forward speed, 492 FPM (150 MPM) return speed, pneumatic pressure beams with precision guide rack & pinion system on both sides.
-- Rip-Cut Section: Machine table with Polyamide gravity rollers on rails to facilitate smooth & accurate infeed of panels; (3) pneumatic front aligners align panels before pressure is applied by the grippers.
-- Programmable Rip-cut pusher fence with rack & pinion drive system, AC Servo brushless drive motor, travel speed 0 - 196 FPM (0 - 60 MPM) forward speed, 196 FPM (60 MPM) return speed, (6) pneumatically raised-and-lowered material grippers, free floating to avoid material jamming.
-- Transfer Section: Middle Buffer Station (MBS) with logic for staggered cuts without interruption of the cut-cycle; carriage pusher bar with rack & pinion drive moves cut strips over transfer table to the cross-cut section, 0.9 HP (0.7 kW) drive motor, travel speed 16.5 - 65 FPM (5 - 20 MPM); pneumatic trap door for automatic ejection of trim strips.
-- Cross-cut Section: Machine table with Polyamide gravity rollers on rails to facilitate smooth & accurate feeding of panels; (4) robust pneumatic aligner posts & front aligner bar align panels before pressure is applied by the grippers; programmable Cross-cut pusher fence with rack & pinion drive system, AC Servo brushless drive motor, travel speed 0 - 196 FPM (0 - 60 MPM) forward speed, 196 FPM (60 MPM) return speed, (9) free-floating material grippers.
-- Pneumatic cross-cut side alignment device align panels against the square fence before cross-cutting, (1) side aligner is in front of the cross-cut line & (1) side liner is behind the cross-cut line, both aligners are equipped with rubber coated rollers to keep the strips aligned during positioning.
-- Left-Hand mounted in-feed conveyor with powered rollers & fork cut-outs; 169" (4,300 mm) x 87" (2,200 mm) lift table; 10,000 Lbs max. lifting table cap.; max. stack height 28" (711 mm) without pit or risers; front of the machine with: (3) Air flotation tables.
-- "CNi Digiset" Electronic controller w/graphics monitor with downloading card, online labeling and "Assist Line" w/LED readout integrated into "high tech" look operator control panel (displays cutting dimensions & patterns).
-- (400) Cutting patterns with (50) different dimensions for ea. pattern, self-diagnostic, and data input by keyboard or direct downloading from office PC (software & card required).
-- Complete with: Wire mesh safety guards & photo-eye barriers around all open machine sections. Actual Model is Selco WNA 4400/2200
Get email updates for Selco WNA 200