1994 ITALPRESSE FORMATIC 20/09 PS

1994 ITALPRESSE FORMATIC 20/09 PS MEMBRANE PRESS [PM-010316] in Spain

Location:
Spain
Price:
$27,140 USD
Manufacturer:
Italpresse
Model:
FORMATIC 20/09 PS

Specifications

Condition:
used
Year:
1994
Recnum:
PM-010316
Comments:
A very economical solution for membrane pressing shaped surface
Machtype:
MEMBRANE PRESS
Condition info:
(3-6) Good condition [4]
Current status:
Active
Elect./voltage:
400 V, 50 Cy, 3 Ph.
Appr. repl. cost:
120000

Description

Platen dimensions 78.73" x 35.43" (2,000 x 900 mm); Designed for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (2.5 - 3) Min depending on the Veneer thickness.

-- Feed Through Press style "flame cut" steel frames; side loading available in the 78" direction, total daylight opening approx. 10", max. workpiece thickness 2-1/8", max. specific pressure 200 PSI (approx.).

-- UPPER platen and Lower platen with imbedded membrane, useful dimension 74" x 32"; membrane filled with "silicone" type heating medium which is heated by upper platen; Lower platen is steel 2" thick and coverd with MYLAR. Both the lower and the top steel platen are drilled for hot water or thermal oil heating, currently setup for diathermic oil heating; approx. 130° operating temperature.

-- Design feature: (3) Large dia. 7 3/4" downstroke hydraulic cylinder/rams (centered in a row), move the upper mobile press platen w/membrane into the closed position and locks it in place with hydraulic pressure cylinders.

-- Integrated 30 kW electrical resistance diathermic oil heating system; fully integrated hydraulic system and free standing separate electrical operator control panel.

--

--