1998 FRIZ MFP-14/27 MEMBRANE PRESS

1998 FRIZ MFP-14/27 MEMBRANE PRESS (DUAL SHUTTLE) [PM-010342] in Canada

Location:
Canada
Manufacturer:
Friz
Model:
MFP-14/27

Specifications

Condition:
used
Year:
1998
Recnum:
PM-010342
Comments:
Imagine, only (3) Rolls of PVC film were used with this FRIZ "MFP" Membrane Press!
Machtype:
MEMBRANE PRESS (DUAL SHUTTLE)
Condition info:
(6-8) Very good condition [8]
Current status:
Active
Elect./voltage:
600 V, 60 Cy, 3 Ph.
Appr. repl. cost:
325000

Description

FRIZ "MFP" Membrane Press with Double shuttle with loading from both ends:

-- Platen dimensions of 1,400 mm (55.1") x 2,700 mm (106.2") with a useful pressing cap. 1,100 mm (43.3") x 2,400 mm (94.4"); 19-1/2" (500 mm) opening, chamber height for a max. material thickness of 3-1/8" (80 mm), max. specific chamber pressure of 5 bar or 80 PSI on ea. platen.Specifications:

-- Actual size of heating platens 106" x 55" (2,700 x 1,400 mm), upper platen unit with electric resistance heating of 24 kW, lower platen with electric resistance heating, heating range up to 240° C; lower vacuum table with large cap. vacuum pump allows processing of concave surfaces.

-- (6) Large dia. down stroke hydraulic cylinders with 500 mm (19-1/2") stroke.Equipped & Complete with:

-- (2) Double-roll manual material holders (for each table/tray - (1) is new -never used), for non-stop operation load (1) side while other side is in press; manual loading-and-unloading shuttle trays on each side of Press allow for continuous operation. When one table/tray is pushed in the other table is pushed out with the same operation.

-- Complete with: Hot air recycler for the compressed air used in pressure chamber and 15 HP hydraulic pump unit.Operation & Operator Interface:

-- Use of a user-friendly PLC "HOMATIC NC 16" control ensures the possibility to set & memorize variable operation parameters like time, pressure, vacuum & temperature.

-- The PLC control also provides for a MODE-2 cycle that allows the press to work without a membrane. This will allow working with veneers, no female moulds, evened out dimensinal tolerances, shorter pressing time, lower energy requirement & a higer degree of effiency.

-- This Press has a special execution for the table height that is at 33", which made it easier for loading and unloading.Special NOTE:

-- This FRIZ Membrane Press was used to produce product consuming only (3) rolls of PVC film.