2016 NEVA ORBIT PLUS FRAME SAW [RG-010690] in United States

United States
$98,800 USD


Thin-kerf sawing at it's finest!
Condition info:
Brand New w/Warranty
Current status:
Brand New
480 V, 60 Cy, 3 Ph.
Appr. repl. cost:


Thin cutting frame saw type Orbit for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Orbit utilizes a totally new up/down method of movement for cutting veneer slats. Unlike conventional frame saws which move up and down in a lineal motion, the Orbit utilizes a patented swing out motion at the bottom of the saw stroke. __ During the downstroke of the saw frame, the cutting motion is perfectly lineal. At the bottom of the stroke, the saw frame swings out of the cut in the same direction as the wood is moving. Once the saw frame has retracted out of the cut, the frame travels back to the top, remaining out of contact with the wood during the entire upward motion. The saw frame then once again begins its lineal downward cutting motion. __ This unique movement has several distinct advantages over the frame movements on older, conventional frame saws. In a conventional frame saw, a great deal of heat is genereated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the Orbit saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, and the ability to use a thinner kerf saw blade. __ TECHNICAL DATA: Main Motor - 15 kW, Feed Speed - 0.3-1.5 m/min, Strokes of the Saw Frame - 210 mm, Strokes per minute - 450 strokes/min, Cutting Height Adjustable - 45-200 mm (8" max. height), Cutting Width with center guide - 2 x 25 mm to 70 mm, Minimum Block Length - 300 mm, Minimum Slat Thickness - 2.5 mm (depending on cutting height), Cutting Accuracy - Approx. +/-0.2 mm, Saw Kerf - 1.25 at 4" or less 1.35 at 4" or more, Saw Blade Life-Stellite Saws - Approx. 10-60 hrs, Dust Hood Diameter - 1 x 120 mm top 1 x 160 mm bottom, Machine Dimensions - L 2600 mm x W 800 mm x H 1700 mm, Machine Weight - 3300 kg or 7,000 lbs. __ EQUIPPED WITH: 1 x Setup frame change device, 2 x Saw frame for cutting 200 mm high (unless otherwise specified), 2 x Complete sets of spacers (according to customer's size requirements), 2 x Complete set of saw blades and hogging blades, 1 x Precision torque wrench (200 Nm), 1 x Adjustable chip breaker, 1 x Air blast system, Automatic opening of the machine for frame removal, Automatic central lubricating system, Automatic raise lower of the feed rollers, Driven feed rollers top and bottom, and Digital feed speed indicator. __ Price includes installation, training and all of the above options.