Top Seller
Bomag Marini Magnum 80 mobile
Location:
Schorfheide, Germany
Manufacturer:
BOMAG

Specifications

Condition:
new
Capacity:
up to 80 t./h
Division:
Construction
Condition info:
new
Subcategory:
Asphalt plant
Subcategory 2:
Asphalt equipment

Description

Bomag Marini Magnum 80 mobile asphalt mixing plant
capacity: up to 80 t./h
1 year guarantee
- 3% weighted average of humidity in the aggregates;
- installation at sea level;
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- ambient temperature of 15°C to 20°C;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.
DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24” wide canvas supported by 4” rollers in “V” shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- Terex CF04 burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex