Top Seller
1990 HARDINGE CHNCI CNC LATHE
Location:
Bethlehem, PA
Manufacturer:
Hardinge lathes
Model:
CHNCI CNC LATHE

Specifications

Condition:
used
Year:
1990
Serial number:
CN-4510T
Stock number:
DK-18139
Note:
NEW 6” 3-JAW POWER CHUCK AVAILABLE AT AN EXTRA COST OF $1,500.00
Size:
1.625"
Electrics:
208V, 3 PH, 60 CYCLE
To spindle:
12.500″
Can be wired:
230-575V, 3 PH, 60 CYCLE
Skidded weight:
6,000 LBS
Machine dimensions:
91.5″ L X 65″ D X 66″ H
Number of stations:
8
16c collet capacity:
1-5/8″
East input increment:
0.00010″
Hole through spindle:
1.875″
Coolant sump capacity:
30 U.S. GAL
Maximum x-axis travel:
4.500″
Maximum z-axis travel:
12.00″
Operating temperature:
113 DEG. F
Spindle configuration:
ANSI A2-5″
Maximum swing over bed:
14.000″
Least command increment:
0.00010″
Maximum fixture diameter:
9.000″
Maximum turning diameter:
8.000″
Compressed air requirement:
70 MIN. TO 90 MAX. PSI
Maximum threading diameter:
8.000″
Square tool size (standard):
1/2″
Maximum x-axis traverse rate:
400 IPM
Maximum z-axis traverse rate:
400 IPM
Height with guard door raised:
90″
(including workholding device):
75 LBS.
Indexing time (station 1 to 8):
2 SECONDS
Round tool diameter (standard):
UP TO 3/4″
Spindle speed range (1-rpm steps):
50 TO 5000 RPM
Indexing time (station-to-station):
1 SECOND
Ac spindle drive (30-minute rating):
10 HP
Subcategory:
Lathes cnc/nc

Description

SPECIFICATIONS
SPINDLE
SPINDLE CONFIGURATION: ANSI A2-5″
HOLE THROUGH SPINDLE: 1.875″
16C COLLET CAPACITY: 1-5/8″
SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM
AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP
CAPACITY
MAXIMUM SWING OVER BED: 14.000″
MAXIMUM THREADING DIAMETER: 8.000″
MAXIMUM TURNING DIAMETER: 8.000″
MAXIMUM FIXTURE DIAMETER: 9.000″
MAXIMUM ALLOWABLE WEIGHT ON SPINDLE
(INCLUDING WORKHOLDING DEVICE): 75 LBS.
TURRET
NUMBER OF STATIONS: 8
SQUARE TOOL SIZE (STANDARD): 1/2″
ROUND TOOL DIAMETER (STANDARD): UP TO 3/4″
MAXIMUM X-AXIS TRAVEL: 4.500″
MAXIMUM Z-AXIS TRAVEL: 12.00″
MAXIMUM X-AXIS TRAVERSE RATE: 400 IPM
MAXIMUM Z-AXIS TRAVERSE RATE: 400 IPM
MAXIMUM DISTANCE FROM TURRET FACE
TO SPINDLE: 12.500″
INDEXING TIME (STATION 1 TO 8): 2 SECONDS
INDEXING TIME (STATION-TO-STATION): 1 SECOND
MISCELLANEOUS
EAST INPUT INCREMENT: 0.00010″
LEAST COMMAND INCREMENT: 0.00010″
COMPRESSED AIR REQUIREMENT: 70 MIN. TO 90 MAX. PSI
5 TO 6 SCFM
MAXIMUM RECOMMENDED AMBIENT
OPERATING TEMPERATURE: 113 DEG. F
COOLANT SUMP CAPACITY: 30 U.S. GAL
GENERAL
SKIDDED WEIGHT: 6,000 LBS
MACHINE DIMENSIONS: 91.5″ L X 65″ D X 66″ H
HEIGHT WITH GUARD DOOR RAISED: 90″
ELECTRICS: 208V, 3 PH, 60 CYCLE
CAN BE WIRED: 230-575V, 3 PH, 60 CYCLE
EQUIPPED WITH
GE FANUC OT CONTROL
NOTE: NEW 6” 3-JAW POWER CHUCK AVAILABLE AT AN EXTRA COST OF $1,500.00