Top Seller
1997 HURCO BMC-30/SSM VMC 3-AXIS
Location:
Bethlehem, PA
Model:
BMC-30/SSM VMC

Specifications

Condition:
used
Year:
1997
Serial number:
B3SM91001047BD
Stock number:
TK-19133
Size:
30" X 18" X 24"
Type:
3 PHASE AC 240 V, DUAL WOUND
Speeds:
80 – 8000 RPM
Type 2:
CARTRIDGE # 40 TAPER
Bearings:
ABEC-7 CLASS ANGULAR CONTACT
Electrics:
220 VOLTS, 3 PH, 60 CYC
Orientation:
ELECTRONIC
Tool holder:
CAT 40 V-FLANGE
Nose to table:
6″ – 30″
Table t-slots:
3 X .71″ ON 4.92″ CENTERS
Weight, approx:
8,332 LBS
Cross table (y):
18″
Working surface:
40.1″ X 15.7″
Air requirements:
5 CFM (18 SCFM) @ 80 – 100 PSI
Coolant capacity:
80 GALLONS
Longitudinal (x):
30″
Work coordinates:
INFINITE
Vertical head (z):
24″
Dimensions, approx:
87″ X 90″ X 90″
Number of stations:
24
Bearing lubrication:
GREASE PACKED
Maximum tool length:
12″
Maximum tool weight:
15 LBS
Torque (30 minutes):
105 LBS/FT AT 500 RPM
Center to column ways:
17.5″
Maximum tool diameter:
3.9″
Programmable feedrates:
0.1 – 300 IPM
Electrical requirements:
19 KVA
Change time chip to chip:
9 SECONDS
Change time tool to tool:
7 SECONDS
Horsepower, (30 minutes):
10 HP
Horsepower, (continuous):
7.5 HP
Maximum thrust rating, z:
2415 LBS
Maximum cutting feedrates:
450 IPM
Maximum rapid traverse, z:
590 IPM
Maximum thrust rating, x & y:
1500 LBS
Maximum rapid traverse, x & y:
945 IPM
Milling capacity (mild steel):
12 CUBIC IPM
Tapping capacity (60% thread):
.75″ – 10″
Drilling capacity (mild steel):
1.25″
Table load w/uniform distribution:
1,100 LBS

Description

SPECIFICATIONS
TABLE
WORKING SURFACE: 40.1″ X 15.7″
TABLE T-SLOTS: 3 X .71″ ON 4.92″ CENTERS
TABLE LOAD W/UNIFORM DISTRIBUTION: 1,100 LBS
SPINDLE MOTOR
HORSEPOWER, (30 MINUTES): 10 HP
HORSEPOWER, (CONTINUOUS): 7.5 HP
TYPE: 3 PHASE AC 240 V, DUAL WOUND
SPINDLE
TYPE: CARTRIDGE # 40 TAPER
NOSE TO TABLE: 6″ – 30″
CENTER TO COLUMN WAYS: 17.5″
SPEEDS: 80 – 8000 RPM
TORQUE (30 MINUTES): 105 LBS/FT AT 500 RPM
BEARINGS: ABEC-7 CLASS ANGULAR CONTACT
BEARING LUBRICATION: GREASE PACKED
ORIENTATION: ELECTRONIC
AUTOMATIC TOOL CHANGER
TOOL HOLDER: CAT 40 V-FLANGE
NUMBER OF STATIONS: 24
MAXIMUM TOOL DIAMETER: 3.9″
MAXIMUM TOOL LENGTH: 12″
MAXIMUM TOOL WEIGHT: 15 LBS
CHANGE TIME TOOL TO TOOL: 7 SECONDS
CHANGE TIME CHIP TO CHIP: 9 SECONDS
AXIS MOTOR
MAXIMUM RAPID TRAVERSE, X & Y: 945 IPM
MAXIMUM THRUST RATING, X & Y: 1500 LBS
MAXIMUM RAPID TRAVERSE, Z: 590 IPM
MAXIMUM THRUST RATING, Z: 2415 LBS
AXIS TRAVEL
LONGITUDINAL (X): 30″
CROSS TABLE (Y): 18″
VERTICAL HEAD (Z): 24″
CAPABILITIES
MILLING CAPACITY (MILD STEEL): 12 CUBIC IPM
DRILLING CAPACITY (MILD STEEL): 1.25″
TAPPING CAPACITY (60% THREAD): .75″ – 10″
PROGRAMMABLE FEEDRATES: 0.1 – 300 IPM
MAXIMUM CUTTING FEEDRATES: 450 IPM
SERVICE REQUIREMENTS
AIR REQUIREMENTS: 5 CFM (18 SCFM) @ 80 – 100 PSI
COOLANT CAPACITY: 80 GALLONS
GENERAL
WEIGHT, APPROX: 8,332 LBS
DIMENSIONS, APPROX: 87″ X 90″ X 90″
ELECTRICAL REQUIREMENTS: 19 KVA
ELECTRICS: 220 VOLTS, 3 PH, 60 CYC
STANDARD FEATURES
AC SERVO MOTORS WITH PRECISION DOUBLE BALLNUT BALLSCREW ASSEMBLIES
FULL CHIP AND COOLANT ENCLOSURE
ISOLATED WAY LUBE SYSTEM
FLOOD COOLANT
DUAL WORKLIGHTS
EQUIPPED WITH
ULTIMAX SSM CNC CONTROL
SINGLE SCREEN WITH 3.5” FLOPPY DRIVE
HIGH CAPACITY HARD DRIVE FOR PART PROGRAM STORAGE
PROGRAMMING POWER OF THE TRADITIONAL ULTIMAX 3/486
HURCO CONVERSATIONAL OR NC PROGRAMMING
CONCURRENT PROGRAMMING
PART ZERO SET
CUTTER COMPENSATION
CANNED CYCLES
PROGRAMMABLE MIRROR IMAGE
MID-PROGRAM RESTART FEATURE
PROGRAMMABLE SAFETY ZONES
NO-CALC PROGRAMMING
INCH/METRIC
DATE BLOCK SEARCH
WORK COORDINATES: INFINITE
INTERPOLATION
ADVANCED POCKET MILLING
CIRCLE POCKET MILLING
BOLT HOLE DRILLING
PROGRAM REVIEW
OPTIONAL SOFTWARE INSTALLED
RIGID TAP
ULTIPOCKET