1" x 138", DAKE LE10A,
Location:
Brockton, MA
Manufacturer:
Dake saws
Model:
LE 10A
Motor:
3 H.P.
Weight:
2645 pounds

Specifications

Condition:
new
Stock number:
420038
Make:
DAKE
Weight:
2645 pounds
Capacity:
Bundled 4-½ inches – 7 inches wide, 5-½ inches high
Division:
Machine Tools
Guarding:
Full hinged
Tool kit:
Standard – Includes screw drivers, wrenches and Allan keys
Head feed:
Hydraulic regulation with RPM compensation feed back
Lubricant:
Flood type unit built into the machine (Electric)
Vise ways:
Precision ground and hardened
Blade size:
138 inches x 1 inch
Chip brush:
Speed synchronized
Foot print:
76 inches x 69 inches (145 inches deep without roller support)
Work light:
Standard
Work table:
Machined with chip clearance inserts
Coolant cap:
10 gallons
Spare parts:
Standard – Includes chip brushes and guide bearing replacements
Work height:
21-½ inches
Coolant pump:
Gear type – 1/8 H.P.
Machine type:
Horizontal scissors type
Swpc(1,"http:
//
Auto shut off:
Pieces reached, out of stock, blade slippage/breakage
Length set up:
Front mounted hand wheel, and DRO with large numeral digits.
Piece counter:
9999 piece with auto shut off
Warning light:
Yes
Compressed air:
N/A (Clean, dry)
Hydraulic pump:
1 H.P.
System control:
PLC
Multiple stroke:
9 times (142 inches maximum)
Blade tensioning:
Mechanical with preset locking ring
Hydraulic pump 2:
Hydraulics on demand (HOD) with minimum pressure start up
Hydraulic oil cap:
5-¼ gallons
Hitch feed capacity:
2790 pounds with use of roller table
Rapid head approach:
Sure stop hydraulically controlled
Drop length possible:
Less than 2 inches
Feed stroke (single):
3/8 inch minimum - 16 inch maximum
Machine support pads:
Standard
Collective hour timer:
Standard
Operating temperature:
No special operating temperature level
Vise clamping pressure:
600 pounds
Horse power blade motor:
3 H.P.
Blade speeds (feet per minute):
88 / 130 / 177 / 223 / 262
Auger style chip removal system:
Standard

Description

swpc(1,"
MAKE: DAKE
MODEL: LE 10A
Machine Type:Horizontal scissors type
Capacity: Bundled 4-½ inches – 7 inches wide, 5-½ inches high
Drop Length Possible:Less than 2 inches
Blade Size:138 inches x 1 inch
Blade Speeds (Feet Per Minute):88 / 130 / 177 / 223 / 262
Feed Stroke (Single): 3/8 inch minimum - 16 inch maximum
Multiple Stroke: 9 times (142 inches maximum)
Feed Type: Hydraulic hitch feed with vertical rollers, feed speed 16 inches in 6 seconds
Length Set Up: Front mounted hand wheel, and DRO with large numeral digits.
Horse Power Blade Motor: 3 H.P.
Hydraulic Pump: 1 H.P.
Coolant Pump:Gear type – 1/8 H.P.
Hydraulic Oil Cap.: 5-¼ gallons
Coolant Cap.:10 gallons
Vises: (Quick set ratchet type)Hydraulic with blade forward clamping for minimized burr and with 1” throw
Vise Clamping Pressure:600 pounds
Vise Ways: Precision ground and hardened
Work Table: Machined with chip clearance inserts
Hitch Feed Capacity: 2790 pounds with use of roller table
Hydraulic Pump:Hydraulics on demand (HOD) with minimum pressure start up
Head Feed:Hydraulic regulation with RPM compensation feed back
Piece Counter:9999 piece with auto shut off
Rapid Head Approach:Sure stop hydraulically controlled
Blade Tensioning:Mechanical with preset locking ring
Electrical: CE approved / Thermo overload, low voltage protection, 110 control voltage
System Control:PLC
Warning Light:Yes
Auto Shut Off:Pieces reached, out of stock, blade slippage/breakage
Chip Brush:Speed synchronized
Foot Print:76 inches x 69 inches (145 inches deep without roller support)
Roller Support with Vertical Roller Dimensions72 inches long x 16 inches wide
Work Height:21-½ inches
Weight:2645 pounds
Tool Kit:Standard – Includes screw drivers, wrenches and Allan keys
Spare Parts:Standard – Includes chip brushes and guide bearing replacements
Work Light:Standard
Machine Support Pads:Standard
Collective Hour Timer:Standard
Auger Style Chip Removal System: Standard
Guarding:Full hinged
Lubricant:Flood type unit built into the machine (Electric)
Voltage· Available 230-volt three phase · Available 460-volt three phase (external transformer)Machine should be wired to main service by a qualified Electrician.
AMP· 20-amp service for 230-volt machine· 16-amp service for 460-volt machine
Compressed Air:N/A (Clean, dry)
Operating Temperature:No special operating temperature level
This machine is listed for sale by
Nevins Machinery Concepts
located in Brockton, Massachusetts