2002 ORMA PM/CA 25/20 MEMBRANE PRESS [PM-010360] in Italy
- $72,453 USD
- PM/CA 25/20
Designed for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; & oil bed on the lower platen with a heated upper platen that works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (1.5 - 2) Min depending on the Veneer thickness.
-- Feed Through Press style "flame cut" steel frames; platen dimensions: 51 1/8" x 98 1/2", (2500 MM X 1300MM) end loading in the 51 1/8" direction, total daylight opening approx. 10", max. workpiece thickness 2-1/8", max. have 650 tons of pressure that generate a specific pressure of 200 PSI (approx.).
-- Lower platen with imbedded membrane, useful dimension 92 1/2" x 45 1/4";(2350 MM X 1150 MM) membrane filled with "silicone" type heating medium which is heated by lower platen; this lower and the top steel platen are drilled for hot water or thermal oil heating, currently setup for diathermic oil heating; approx. 130Ã‚Â° operating temperature.
-- Design feature: (4) Large dia. down stroke hydraulic cylinder/rams (centered in a row), move the lower mobile press platen w/membrane using rack & pinion into the closed position and locks it in place with hydraulic pressure cylinders.
-- Integrated 30 kW electrical resistance diathermic oil heating system; fully integrated hydraulic system and free standing separate electrical operator control panel.
-- Additionally includes; Saftey electric eye on the loading table.; Flashing saftey lights for tray movement.
Get email updates for Orma PM/CA 25/20