- Serial number:
- Stock number:
- AS1210 Class 3
- 5600 - 11000 litres / hr. (subject to product and head)
- IP55 Rated, 52.5Nm
- Max 3 Cub M/Hr Water (conditions may vary)
- 5 Bar
- Tooth width:
- Thickness (Outer) 11mm
- Product dependent. Kettle size 500L
- Inner diameter:
- Outer diameter:
- Wall thickness:
- 4mm inside wall, 1.6mm jacketed wall
- Inner diameter 2:
- Outer diameter 2:
- Test pressure (htp):
- 450 KPa
- Design pressure (wp):
- 300 KPa
- Design temperature (dt):
- 135 deg C (max 150 deg C)
- Jacket inlet & outlet ports:
- 25mm diameter
IOPAK brand new COOKING/MIXING SYSTEM - SKID MOUNTED.
PROCESS PLANT NETWORK is justly proud of their new IOPAK fully stainless steel constructed jacketed cooker/kettle which can be used for cooking or cooling. This system could be used for mayonnaise, sauces, creams & lotions. Kettles come in sizes 250L, 500L, 1000L & 2000L. All are fitted with steam jackets and there are two variations of cookers. One type has a single action scraper agitator/mixer arm whilst the other has a contra rotating mechanism.
This system comprises of the following items:
1) IOPAK 500L JACKETED COOKER/KETTLE WITH CONTRA-ROTATING MIXER
This 500L cooker/kettle is fitted with a contra-rotating scrape surface mixing arm.
This kettle features 2 x half moon hinged lids for food hygiene.
The interior of the tank has a dome base and is fitted with a 3" product outlet including an air actuated discharge valve.
An swept surface (Teflon tipped) stirrer is top and bottom bearing supported and direct driven by a 2.2kW, 29rpm, 415V AC, Three Phase gear motor.
An additional contra - rotating centrally mounted agitator is fitted with a 0.75kW, 49 rpm gearmotor.
A digital (- 20 to 150 deg C ) temperature indicator indicates the temperature of the tank contents.
Design Pressure (WP) : 300 KPa
Test Pressure (HTP) : 450 KPa
Design Temperature (DT) :135 deg C (max 150 deg C)
Code: AS1210 Class 3
Internal Diameter - 1100 mm
Internal Depth - 750mm
Outer Diameter - 1250mm
Lid height above floor - 1400mm
Outlet Height above floor - 560mm
Overall Height - 2200mm
Jacket inlet & outlet ports: 25mm diameter
Material of Construction - 316 s/s (inner) 304 s/s (outer)
Wall Thickness: 4mm inside wall, 1.6mm jacketed wall
PRICE FOR THE KETTLE ALONE IS $26,750
2) IOPAK 2" ROTARY LOBE PUMP
This BRAND NEW rotary lobe pump comes with an ABB motor and a control panel.
The specification of the pump is as follows:
Flow: 5600 - 11000 litres / hr. (subject to product and head)
Pressure: 5 Bar
[ABB Motor - IEC34-1]
Other: IP55 Rated, 52.5Nm
This model comes with a stainless steel shrouding and a speed controller (inverter)
Price for brand new stainless steel shrouded pump (ordered seperately if you wish to buy only the pump) AUD $12,000.00 ex works (add GST if resident in Australia)
3) IOPAK INLINE COLLOID MILL
This is a brand new fully stainless steel toothed colloid mill/emulsifier. It has a high shear dispersing action and is used for the continuous production or closed circuit treatment of fine material. Typical products to be emulsified, might include: Mayonnaises, sauces, emulsions, lotions, creams, purees etc
Capacity: Max 3 Cub M/Hr Water (conditions may vary)
Pump suction pressure is less than 0.2Mpa
Inner Diameter: 100mm
Outer Diameter: 140mm
Gap between teeth (Inner) 4mm
Gap between teeth (Outer) 4m
Tooth width (Inner) 8mm
Tooth width: Thickness (Outer) 11mm
Inner Diameter: 80
Get email updates for IOPAK 500 Cooksys