- Serial number:
- Stock number:
- Max 3 Cub M/Hr (Water - conditions may vary)
- Tooth width:
- Thickness(Outer) 11mm
- Max 3 Cub M/Hr (Water)
- Inner diameter:
- Outer diameter:
- Inner diameter 2:
- Outer diameter 2:
IOPAK TRS1 Series. Model TRL1/100-2.2 H In Line High Shear Dispersion Emulsifier
This is a brand new fully stainless steel toothed colloid mill/emulsifier. It has a high shear dispersing action and is used for the continuous production or closed circuit treatment of fine material.
Typical products to be emulsified, might include: Mayonnaises, sauces, emulsions, lotions, creams, purees etc.
Capacity: Max 3 Cub M/Hr (Water - conditions may vary)
Pump suction pressure is less than 0.2Mpa
Inner Diameter: 80mm
Outer Diameter: 115mm
Gap between teeth (Inner) 34mm
Gap between teeth (Outer) 34m
Tooth width(Inner) 8mm
Tooth width: Thickness(Outer) 11mm
Inner Diameter: 50mm
Outer Diameter: 100mm
Gap between teeth (Inner) 3mm
Gap between teeth (Outer) 3m
Tooth width(Inner) 8mm
Tooth width Thickness(Outer) 13mm
It is fitted with 30mm "Triclover" type inlet and outlet ports, in addition to a drain port terminating with a manually operated butterfly valve at the base of the head.
Mounted on castors to provide portability.
Max discharge pressure is 0.2 MPA.
Drive Source - 2.2KW, 2920, 415V AC, Three Phase, TEFC Electric Motor direct coupled to the head.
Trolley not supplied as seen in photo.
sturdy and light weight to manoeuvre into working position
easy to operate and maintain
combined technology of pulverisation, dispersion, emulsification and
low noise emission and stable whilst in use
mounted on castors.
This emulsifier can be used in various industries, such as:
Pharmaceutical (lotions and creams)
Food and beverage (purees, mayonnaise, sauces, juices)
for the following types of product contents:
Solids and liquids
This emulsifier is excellent for the emulsification of products with a high
viscosity and liquids in suspension, with a high level of solids.
Liquids and oils
This emulsifier is excellent for the emulsification of products with oil and
Gas, liquids and solids
This emulsifier is excellent for the emulsification of gas, liquids and solids
through dissolving, absorbing and dispersing the product.
Get email updates for IOPAK TRL1/100-2.2 H