1998 BURKLE MULTIFOILER BTF 1528-1400 MEMBRANELESS VACUUM PRESS [PM-010362] in Europe
- $49,650 USD
- MULTIFOILER BTF 1528-1400
BURKLE "BTF" Membrane(less); designed for lamination of pre-shaped panels, surface material of, PVC, high gloss PVC, PET foil, and ABS Foil without the use of a membrane.
-- Allows cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film thickness.
-- Platen dimensions: 1,500 x 2,800 mm (59" x 110") and 1,330 x 2,630 mm (52" x 103") usable platen area; Workpiece thickness from 18 - 35 mm;, 6 Bar (85 PSI) specific pressure.
-- End loading, automatic shuttle loading; (2) shuttle tables, automatic shuttle loading tray runs on chain transport system with automatic movement in-and-out of Press for continuous operation; chain transport system for the automatic return of the shuttle tray located underneath the Press.
-- Equipped with: Solid steel top & bottom platens 100 mm thick, through bored for thermal oil flow; upper press platen opens-and-closes with pressure from (6) large dia. down stroke hydraulic cylinders.
-- Electrically heated thermal oil heating system, max. platen temperature of 150Ã‚Â° C (302Ã‚Â° F); 31 kW power rating for heating requirement.
-- Twin-tank Vacuum System with high capacity accumulator tank for very rapid draw down of the film over the shaped panels; mounted on top of Press.
-- Separate electrical control cabinet houses the programmable SIEMENS "COROS OP15" controller and operator control panel.
-- Features working without a membrane: Allows forming the film into deep & vertical sided profiles, very small profiles like vein lines, and lipped profiles, which are not possible using a membrane.
-- Also allows higher working temperatures required for laminating the environmentally preferred Polypropylene films and saves the expense of regularly replacing damaged/worn membranes.
-- Paternoster: 24 rolls; Foil cutting: Yes.
-- Approx. Press weight of 15,000 kG (33,000 Lbs).
Get email updates for BURKLE MULTIFOILER BTF 1528-1400