- Chicago, IL
- Contact Seller
- 2200 Lbs.
Each Floor Plate is Slotted with X- and Y-Axis T-Slots. The center to center distance is 15". The slots are 1-1/2" wide at the top. At a depth of 1-1/2", the slot widens to 3" for another 1-1/2", for a total slot depth of 3".
All four sides are machined and finished. In each corner is a bolt hole so the plate may be anchored to the floor. Perhaps a type of bolt could be used as a leveling jack, if so required.
There are no connection butts, as these are fully-machined sides. They would be laid flat and butted against one another, anchored at the corners, holding in place without any movement or buckling.
Plates are cast iron and solid. Slots are filled with removable custom wood that is wedged in to keep out debris.
Dish areas have a 3/4" hole in the bottom center and can be used for anchoring work or plates. Dish areas are ground flush.
**Please Call for Special Pricing on Multiple Units**
Get email updates for machine tools