Top Seller
no-image_en.png
Location:
Hialeah, FL
Manufacturer:
Metalmaq

Specifications

Condition:
used
Stock number:
4204
F.o.b:
Hialeah, FL
Division:
Metalworking
Electrics:
220/440 volt, 3 phase, 60 Hz.
Quartz worklight:
100.00
Air power drawbar:
650.00
Coolant base tray:
195.00
Automatic lubrication:
125.00
Swivel base for 6" vise:
175.00
Ball screw on vertical (z) axis:
1,900.00
Kurt 6" angle-lock milling vise:
425.00
Coolant system (1/8 hp, 220/3/60):
250.00
Evs head by inverter system (5 hp):
1,450.00
Subcategory:
Millers, vertical

Description

One new METALMAQ model B180VS Bed Mill with standard accessories. . $15,995.00
OPTIONAL ACCESSORIES:
ALIGN SP250A power feed unit--longitudinal (X) axis . . . . . . . . 500.00
ALIGN SP250B power feed unit--cross (Y) axis. . . . . . . . . . . . 500.00
ALIGN SP250C power feed unit--vertical (Z) axis . . . . . . . . . . 500.00
Gear type power feed unit--longitudinal (X) axis. . . . . . . . . . 1,300.00
Gear type power feed unit--cross (Y) axis . . . . . . . . . . . . . 1,400.00
Automatic lubrication . . . . . . . . . . . . . . . . . . . . . . . 125.00
Coolant system (1/8 HP, 220/3/60) . . . . . . . . . . . . . . . . . 250.00
Coolant base tray . . . . . . . . . . . . . . . . . . . . . . . . . 195.00
Quartz worklight. . . . . . . . . . . . . . . . . . . . . . . . . . 100.00
Ball screw on vertical (Z) axis . . . . . . . . . . . . . . . . . . 1,900.00
EVS head by inverter system (5 HP). . . . . . . . . . . . . . . . . 1,450.00
Air power drawbar . . . . . . . . . . . . . . . . . . . . . . . . . 650.00
NEWALL Topaz 2 axis digital readout (installed) . . . . . . . . . . 2,350.00
NEWALL Topaz 3 axis digital readout (installed) . . . . . . . . . . 2,950.00
KURT 6" angle-lock milling vise . . . . . . . . . . . . . . . . . . 425.00
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . . 175.00
ELECTRICS: 220/440 volt, 3 phase, 60 Hz.
F.O.B.: Hialeah, FL
STANDARD ACCESSORIES:
5 HP variable speed head with #40 spindle
Hardened and ground 10" x 54" table with ground T-slots
Hardened and ground longitudinal (X), cross (Y) and vertical (Z) axes ways
Ball screws on longitudinal (X) and cross (Y) axes with double nut
Power lifting motor for table/knee vertical (Z) travel
Box ways on both cross (Y) and vertical (Z) axes
Turcite-B coated XYZ ways, gibs and saddle slideways
Counter-weight on head
Licensed Meehanite casting
Electric box and control panel
SPECIFICATIONS:
Size of table (length x width) 10" x 54" (250mm x 1350mm)
Hardened & ground ways yes
Longitudinal travel
--without power feed unit 30" (770mm)
--with power feed unit 27" (690mm)
Cross travel 21" (540mm)
Vertical head travel
--manual 20.8" (530mm)
--automatic 20" (500mm)
Quill traverse 5" (127mm)
Quill power feed rate--number 3
--range .0015"--.003"--.006"
(0.04mm--0.08mm--0.14mm)
Spindle taper #40
Main motor 5 HP
Head swivels right & left 45 degrees
Rapid traverse rate of head (Z)
lifting motor 35.4ipm (900mm/min)
Distance from center of spindle
to the column 22-1/4" (565mm)
Distance from spindle nose to table top
--manual (min-max) 3"--22.6" (75mm-575mm)
--automatic (min-max) 3.9"--21.6" (100mm-550mm)
Spindle speeds--number infinitely variable
--range 60 to 4300 rpm
Net weight (approx.) 4,480 lbs. (2000 kgs)