Top Seller
no-image_en.png
Location:
Hialeah, FL
Manufacturer:
Edwards presses

Specifications

Condition:
used
Stock number:
4327
Division:
Metalworking
Export crating:
600.00
1" pipe notcher dies:
448.00
10" 4 way attachment:
1,086.00
2" pipe notcher dies:
536.00
1/2" pipe notcher dies:
391.00
3/4" pipe notcher dies:
420.00
1-1/2" pipe notcher dies:
508.00
1-1/4" pipe notcher dies:
478.00
Oversized punch assembly:
578.00
Square punch & die (up to 3/4"):
per/set . 116.00
Rectangular 2" x 4" 5/16" notcher:
standard
Round punch & die (1/8" to 1-1/16"):
per/set . 31.00

Description

10" throat and standard accessories which include
5" x 5" angle iron blades, 24" bar shear blade, one round punch
and die (17/32" dia.), and 5 HP, 1425 RPM motor wired for 220/3/60
OPTIONAL ACCESSORIES:
5 HP, 1425 RPM motor wired for 220/1/60 operation . . . . . . . . . 300.00
Punch and die starter box (contains 8 sets of punches & dies) . . . 303.00
Round punch & die (1/8" to 1-1/16") . . . . . . . . . . . per/set . 31.00
Square punch & die (up to 3/4") . . . . . . . . . . . . . per/set . 116.00
Oblong punch & die (up to 1-1/16" x 1-1/16"). . . . . . . per/set . 132.00
Oversized punch assembly. . . . . . . . . . . . . . . . . . . . . . 578.00
90 degree angle notcher 3" x 3" x 1/4". . . . . . . . . . . . . . . 1,086.00
Rectangular 2" X 4" 5/16" notcher . . . . . . . . . . . . . . . . . standard
Rod shear and housing, 1/4", 3/8", 1/2", 5/8", 3/4", 1", round. . . 1,270.00
Brake attachment--65 ton--8" 4 way attachment . . . . . . . . . . . 883.00
10" 4 way attachment . . . . . . . . . . . 1,086.00
Pipe notcher housing for 1/2" to 2" OD tubing (schedule 40) . . . . 347.00
1/2" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . . 391.00
3/4" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . . 420.00
1" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . . . 448.00
1-1/4" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . 478.00
1-1/2" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . 508.00
2" pipe notcher dies. . . . . . . . . . . . . . . . . . . . . . . . 536.00
Stroke limiter (controls the up stroke) . . . . . . . . . . . . . . standard
Export crating. . . . . . . . . . . . . . . . . . . . . . . . . . . 600.00
In-bound freight from factory to Miami warehouse. . . . . . . . . . 1,500.00
SPECIFICATIONS:
Tonnage 65
Throat 10"
Capacity 1-1/16" thru 3/4"
Largest punch accepted with
--standard punch holder 1-1/16"
--oversized punch holder 1-9/16"
Largest die accepted with
--standard die holder 1-1/4"
--oversized die holder 1-5/8"
Open height 8-1/8"
Shut height 6-3/4"
Stroke 1-3/8"
BAR SHEAR
Maximum cutting length 24"
Cutting capacity--maximum width 3/8" x 24"
--max. thickness 1" x 4"
ANGLE SHEAR
Maximum angle @ 90 degree 5" x 5" x 1/4"
4" x 4" x 3/8"
MOTOR & ELECTRICS
Motor power 5 HP
Electrics--standard 208-220/3/60
--optional 220/1/60, 440/3/60
DIMENSIONS
Base dimensions 42" x 58"
Overall height 55"
Net weight 3,550 lbs.
STANDARD FEATURES:
Complete punch system, Punch strippers, Fully guarded,
Remote foot pedal operation, Low rake angle on shear blades,
Reversible shear blades for extended life, Direct drive pump,
Fast adjusting holddown bars, Tray for cut stock, Coupling wrench,
Hydraulic system charged and ready to operate, Sound insulated,
Coper/nother table and blades installed, Up-stroke limiter installed,
Equipped with open cavity for accessory tooling, One year warranty